About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 20 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
24 | 32 | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1 1/4" | 1" | 1,950 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
1 1/4" | 2" | 1,950 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
1 1/4" | 3" | 1,950 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||
23/32" | 5/8" | 1,950 lbs. @ 60 rpm | -320° to 530° | 0000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
1" | 3/4" | 1,950 lbs. @ 60 rpm | Grooved | -350° to 450° | 00000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||
20mm | 20mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 00000 |
22mm | 20mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
25mm | 20mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 20mm Shaft Dia. | ||||||
22mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
24mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
25mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
26mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
28mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
Multipurpose Sleeve Bearings with Groove
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
1" | 3/4" | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 000000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 20mm Shaft Dia. | ||||||||||
26mm | 32mm | 32mm | 3mm | 1,950 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 000000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,950 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 000000 |
7/8" | 1 1/4" | 1 1/4" | 1/8" | 1,950 lbs. @ 60 rpm | 1,150 lbs. @ 60 rpm | Blue | -40° to 150° | 000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
1 1/8" | 1 1/4" | 1 1/2" | 1/8" | 1,950 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||
1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 1,950 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||||
20mm | 20mm | 24mm | 2mm | 1,950 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 000000 |
22mm | 20mm | 28mm | 3mm | 1,950 lbs. @ 60 rpm | 2,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
For 20mm Shaft Dia. | ||||||||||
24mm | 16mm | 28mm | 2mm | 1,950 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
26mm | 16mm | 32mm | 3mm | 1,950 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |