About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
7/8" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 000000 |
15/16" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
1" | 1/2" | 2,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than 863 iron-copper bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 2,350 lbs. @ 60 rpm | 2,300 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 000000 | 000000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | |||||||||
1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 2,350 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 000000 |
High-Speed Oil-Embedded Mounted Sleeve Bearings
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.
Bearings with an oil cup have a reservoir that distributes additional oil onto the bearing. A self-closing hinged cover keeps out contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
With Oil Cup | ||||||||||||||
1" | 15/16" | 2" | 4 1/32" | 1 3/16" | 1 3/16" | 21/32" | 21/64" | 2 31/32" | 2,350 lbs. @ 60 rpm | -40° to 240° | Self Aligning | Lubricated | 0000000 | 000000 |