About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Ball and Roller Bearings
More
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
R1-2Z | 0.055" | 3/16" | 7/64" | 440C Stainless Steel | 25 | 10 | 68,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 000000 |
Plastic Ball Bearings
These acetal bearings have good all-around corrosion and chemical resistance.
316 stainless steel balls have excellent corrosion resistance.
Glass balls have even more corrosion resistance than stainless steel balls.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
316 Stainless Steel Ball | ||||||||||||
Open | ||||||||||||
R4 | 1/4" | 5/8" | 0.196" | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 000000 | 00000 |
R4A | 1/4" | 3/4" | 9/32" | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 0000 |
625 | 5mm | 16mm | 5mm | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 0000 |
626 | 6mm | 19mm | 6mm | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 0000 |
Glass Ball | ||||||||||||
Open | ||||||||||||
R4 | 1/4" | 5/8" | 0.196" | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 000000 | 00000 |
R4A | 1/4" | 3/4" | 9/32" | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 0000 |
Water-Resistant Plastic Ball Bearings
Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications. They also have excellent chemical and corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | 316 Stainless Steel Ball | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
R4 | 1/4" | 5/8" | 0.196" | PVDF Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 000000 |
R4A | 1/4" | 3/4" | 9/32" | PVDF Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 0000000 | 00000 |
Lubrication-Free Plastic Flanged Ball Bearings
Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance. The flange ensures proper positioning inside a tube or housing.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||||
R4 | 1/4" | 5/8" | 0.196" | 0.69" | 0.04" | Acetal Plastic | 25 | 15 | 2,300 | Not Required | -40° to 180° | Not Rated | 000000 | 000000 |
Shielded | ||||||||||||||
6000 | 10mm | 28mm | 9mm | 30mm | 2mm | Acetal Plastic | 25 | 20 | 1,900 | Not Required | -40° to 175° | Not Rated | 00000000 | 00000 |
6000 | 10mm | 35mm | 9mm | 38mm | 2mm | Acetal Plastic | 25 | 20 | 1,900 | Not Required | -40° to 175° | Not Rated | 00000000 | 00000 |
Precision Flanged Ball Bearings
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||||
R1-2Z | 0.055" | 3/16" | 7/64" | 0.234" | 0.03" | 440C Stainless Steel | 25 | 10 | 68,000 | Lubricated | -60° to 250° | ABEC-7 | 0000000 | 000000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||
5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 000000 | 000000 |
11/16" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |
Steel Crowned Rollers without Seal | ||||||||||||||
5/8" | 7/16" | 1/4" | 3/4" | 1/4"-28 | 5/16" | 15/32" | 1/32" | 1,200 | 25 | 250° | Plain | Mounting Hardware | 00000000 | 00000 |