About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||
8mm | 8mm | 25 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||
12mm | 8mm | 25 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 0000 |
For 10mm Shaft Dia. | ||||||
14mm | 8mm | 25 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
16mm | 8mm | 25 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
16mm | 8mm | 25 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 1/8" | 25 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | |||||||
12mm | 10mm | 25 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12 mm Shaft Dia. | ||||||||||
15mm | 20mm | 18mm | 1.5mm | 25 lbs. @ 120 rpm | 9.5 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |