Mounted Bearing Type Mounted Bearing Type |
---|
![]() | ![]() |
Base Mount | Two-Bolt Flange Mount |
Bearing Type Bearing Type |
---|
![]() | Plain |
For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
Maximum Temperature Maximum Temperature |
---|
|
Housing Material Housing Material |
---|
|
Bearing Material Bearing Material |
---|
|
Alignment Style Alignment Style |
---|
|
Lubricant Lubricant |
---|
|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Show |
---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Hide |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
For 5/8" Shaft Dia. | |||||||
3/4" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
1" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
1 1/8" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 1" Shaft Dia. | |||||||
1 1/4" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | |||||||
1 1/4" | 1 1/4" | 2,750 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
7/8" | 1 1/4" | 1 1/8" | 1/8" | 2,750 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
7/8" | 1 1/4" | 1 1/4" | 1/8" | 2,750 lbs. @ 60 rpm | 1,600 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 2,750 lbs. @ 60 rpm | 1,400 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | ||||||||||
1 1/8" | 1 1/4" | 1 1/2" | 1/8" | 2,750 lbs. @ 60 rpm | 1,700 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 2,750 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Also known as Super Oilite® bearings, they release a thin layer of oil onto their surface due to startup friction. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 bearing bronze bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Bearing Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 2,750 lbs. @ 60 rpm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings

The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||||
20mm | 25mm | 24mm | 2mm | 2,750 lbs. @ 60 rpm | 1,750 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 000000 |
22mm | 25mm | 28mm | 3mm | 2,750 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
For 20mm Shaft Dia. | |||||||||
22mm | 20mm | 24mm | 1mm | 2,750 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
25mm | 20mm | 30mm | 2.5mm | 2,750 lbs. @ 60 rpm | 2,700 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
Dry-Running Mounted Sleeve Bearings

Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
5/8" | 3/4" | 1 9/16" | 3 1/4" | 55/64" | 55/64" | 11/32" | 2 1/2" | 2,750 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 000000 | 000000 |
3/4" | 3/4" | 1 9/16" | 3 1/4" | 55/64" | 55/64" | 11/32" | 2 1/2" | 2,750 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 000000 | 00000 |
3/4" | 1" | 1 15/16" | 4" | 7/8" | 7/8" | 11/32" | 3 1/8" | 2,750 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 00000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
5/8" | 1 5/8" | 3 1/4" | 55/64" | 55/64" | 1/4" | 13/32" | 2 1/2" | 2,750 lbs. @ 60 rpm | -40° to 380° | Self Aligning | 0000000 | 000000 |
3/4" | 1 5/8" | 3 1/4" | 55/64" | 55/64" | 1/4" | 13/32" | 2 1/2" | 2,750 lbs. @ 60 rpm | -40° to 380° | Self Aligning | 0000000 | 00000 |