About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 6 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
9 | 16 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
10 | 16 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
12 | 16 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 8 mm Shaft Dia. | |||||||
11 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
12 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 12 mm Shaft Dia. | |||||||
16 | 8 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
18 | 8 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 6mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
10 | 16 | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
For 8mm Shaft Dia. | |||||||
11 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
12 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 12mm Shaft Dia. | |||||||
16 | 8 | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 6mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
10mm | 16mm | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 8mm Shaft Dia. | |||||||
11mm | 12mm | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
12mm | 12mm | 290 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
PEEK Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||
5/16" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1/4" Shaft Dia. | ||||||
3/8" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 5/16" Shaft Dia. | ||||||
1/2" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
9/16" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 3/8" | 290 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 16mm | 14mm | 2mm | 290 lbs. @ 120 rpm | 380 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||||||
12mm | 12mm | 16mm | 2mm | 290 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 12mm Shaft Dia. | ||||||||||
18mm | 8mm | 24mm | 3mm | 290 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 16mm | 14mm | 2mm | 290 lbs. @ 120 rpm | 380 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||||||
12mm | 12mm | 16mm | 2mm | 290 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 12mm Shaft Dia. | ||||||||||
18mm | 8mm | 24mm | 3mm | 290 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||||
12mm | 12mm | 16mm | 2mm | 290 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
Chemical-Resistant Dry-Running Flanged Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
3/8" | 3/8" | 1/2" | 1/16" | 290 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 3/8" Shaft Dia. | |||||||||
1/2" | 3/8" | 5/8" | 1/16" | 290 lbs. @ 120 rpm | 250 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||
11mm | 6mm | 14mm | 1.5mm | 290 lbs. @ 120 rpm | 640 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |