About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15/16" | 2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
1" | 2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1" Shaft Dia. | |||||||
1 1/8" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 3/16" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 5/16" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1 3/8" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1 1/2" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 16mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
20mm | 16mm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
22mm | 16mm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
For 20mm Shaft Dia. | |||||||
24mm | 16mm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1 1/4" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||
1 5/8" | 1 1/2" | 1 3/8" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
954 aluminum-bronze bearings have high strength and excellent corrosion resistance, making them suitable for use in marine and mining applications.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
Metric 954 Aluminum-Bronze | ||||||
---|---|---|---|---|---|---|
For 20mm Shaft Dia. | ||||||
25mm | 25mm | 3,000 lbs. @ 60 rpm | Grooved | -350° to 500° | 00000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
7/8" | 1" | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
1" | 1" | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
1 1/4" | 1" | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 1" Shaft Dia. | ||||||
1 1/4" | 3/4" | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 22mm Shaft Dia. | ||||||
27mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
28mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
29mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 3,000 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
1 3/8" | 1 1/2" | 1 5/8" | 3/16" | 3,000 lbs. @ 60 rpm | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 3,000 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 000000 |
1 3/8" | 1 1/2" | 1 5/8" | 3/16" | 3,000 lbs. @ 60 rpm | 2,500 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||
1" | 1" | 1 1/4" | 3/16" | 3,000 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | -70° to 450° | 0000000 | 000000 |
For 1" Shaft Dia. | ||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 3,000 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | -70° to 450° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
1" | 1" | 1 1/4" | 3/16" | 3,000 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 3,000 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
1 1/4" | 3/4" | 1 1/2" | 3/16" | 3,000 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
1 3/8" | 3/4" | 1 5/8" | 3/16" | 3,000 lbs. @ 60 rpm | 3,750 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
Metric 932 Bearing Bronze Bearings | ||||||||||
For 22mm Shaft Dia. | ||||||||||
27mm | 22mm | 32mm | 2.5mm | 3,000 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
1" | 1" | 1 1/4" | 3/16" | 3,000 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Required | -70° to 450° | 000000000 | 000000 |
For 1" Shaft Dia. | |||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 3,000 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Required | -70° to 450° | 000000000 | 00000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
1" | 15/16" | 1 7/8" | 5" | 1 1/2" | 1 1/2" | 5/8" | 1/2" | 4" | 3,000 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |