Clear All
Bearing Type Bearing Type |
|---|
 | Ball |
Ball Bearing Type Ball Bearing Type |
|---|
 | Flanged |
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
Inner Ring Type Inner Ring Type |
|---|
 | Standard |
Shaft Mount Type Shaft Mount Type |
|---|
|
Lubrication Lubrication |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Show |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Ball Material Ball Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Lubricant Lubricant |
|---|
|
ABEC Rating ABEC Rating |
|---|
|
Construction Construction |
|---|
|
Misalignment Capability Misalignment Capability |
|---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
|---|
|
About Ball and Roller Bearings
More
Self-Aligning Flanged Ball Bearings
Open
Shielded
Sealed
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Stainless steel bearings are more corrosion resistant than steel bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
440C Stainless Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 000000 |
| 10mm | 24mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Shielded | |||||||||||||
440C Stainless Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 10mm | 24mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Sealed | |||||||||||||
440C Stainless Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 325 | 140 | 18,500 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 10mm | 24mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 18,500 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |