About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 14mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
18mm | 20mm | 3,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1 1/4" | 1 3/4" | 3,450 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 20mm Shaft Dia. | |||||||||
25mm | 25mm | 30mm | 2.5mm | 3,450 lbs. @ 60 rpm | 2,700 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 000000 |
For 25mm Shaft Dia. | |||||||||
30mm | 20mm | 35mm | 2.5mm | 3,450 lbs. @ 60 rpm | 3,250 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |