About Plain Bearings
More
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||
12mm | 30mm | 16mm | 2mm | 360 lbs. @ 120 rpm | 110 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
Food Industry Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. They withstand wet, corrosive environments and have good chemical compatibility. The closed backing blocks out dust and other contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Specifications Met | Each | |
PEEK Plastic Bearings with PEEK Plastic Housing | |||||||||||||
1/4" | 19/32" | 1 5/64" | 15/32" | 5/16" | 5/32" | 9/64" | 11/16" | 360 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 00000 |