About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/16" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
3/8" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/2" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
7/16" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/2" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
9/16" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
5/8" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
11/16" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 8 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
10 | 15 | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
For 10 mm Shaft Dia. | |||||||
13 | 12 | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 12 mm Shaft Dia. | |||||||
16 | 10 | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
18 | 10 | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1/4" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
5/16" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 000 |
For 1/4" Shaft Dia. | |||||||
3/8" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 000 |
For 6mm Shaft Dia. | |||||||
9mm | 10mm | 370 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
10mm | 10mm | 370 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/16" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
1/2" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
1/2" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 0000 |
5/8" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 0000 |
3/4" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1/2" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 00000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||
3/8" | 3/8" | 370 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | __ | 0000000 | 00000 |
For 6mm Shaft Dia. | ||||||||
9mm | 10mm | 370 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 0000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 4mm Shaft Dia. | |||||
5.5mm | 6mm | 370 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||
3/8" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
7/16" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
1/2" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 3/8" Shaft Dia. | ||||||
1/2" | 5/8" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
5/8" | 5/8" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||
12mm | 20mm | 30mm | 370 lbs. @ 120 rpm | Maroon | -400° to 500° | 00000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||
1/4" | 1/2" | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
5/16" | 1/2" | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 1/4" Shaft Dia. | ||||||
3/8" | 3/8" | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 3/8" Shaft Dia. | ||||||
1/2" | 1/4" | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 5mm Shaft Dia. | ||||||
6mm | 12mm | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
8mm | 12mm | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 6mm Shaft Dia. | ||||||
10mm | 10mm | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 10mm Shaft Dia. | ||||||
12mm | 6mm | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1/2" | 3/4" | 5/8" | 1/16" | 370 lbs. @ 120 rpm | 510 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/8" Shaft Dia. | ||||||||||
1/2" | 1/2" | 5/8" | 1/16" | 370 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/2" | 1/2" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
9/16" | 1/2" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
5/8" | 1/2" | 7/8" | 1/16" | 370 lbs. @ 120 rpm | 890 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 3/8" | 7/8" | 1/8" | 370 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Metric 841 Bearing Bronze Bearings | ||||||||||
For 10mm Shaft Dia. | ||||||||||
13mm | 12mm | 16mm | 1.5mm | 370 lbs. @ 120 rpm | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
16mm | 12mm | 22mm | 3mm | 370 lbs. @ 120 rpm | 850 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||||||
5/16" | 1/2" | 7/16" | 1/16" | 370 lbs. @ 120 rpm | 310 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
3/8" | 1/2" | 7/16" | 1/16" | 370 lbs. @ 120 rpm | 310 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 000 |
For 1/4" Shaft Dia. | ||||||||||
3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 000000 | 000 |
For 6mm Shaft Dia. | ||||||||||
9mm | 10mm | 12mm | 1.5mm | 370 lbs. @ 120 rpm | 310 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
10mm | 10mm | 14mm | 2mm | 370 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
For 3/8" Shaft Dia. | ||||||||||
1/2" | 1/2" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 510 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 0000 |
9/16" | 1/2" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
5/8" | 1/2" | 7/8" | 1/16" | 370 lbs. @ 120 rpm | 890 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 3/8" | 7/8" | 1/8" | 370 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 0000 |
For 10mm Shaft Dia. | ||||||||||
13mm | 12mm | 16mm | 1.5mm | 370 lbs. @ 120 rpm | 370 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
16mm | 12mm | 22mm | 3mm | 370 lbs. @ 120 rpm | 850 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
6 mm Shaft Dia. | ||||||||||
9 | 10 | 12 | 1.5 | 370 lbs. @ 120 rpm | 310 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
10 | 10 | 14 | 2 | 370 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||||
3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||||||||
5/8" | 1/2" | 7/8" | 1/16" | 370 lbs. @ 120 rpm | 890 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
For 1/2" Shaft Dia. | |||||||||||
5/8" | 3/8" | 7/8" | 1/8" | 370 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
For 10mm Shaft Dia. | |||||||||||
13mm | 12mm | 16mm | 1.5mm | 370 lbs. @ 120 rpm | 370 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||||
3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||||||
1/2" | 1/2" | 5/8" | 1/16" | 370 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
5/8" | 1/2" | 7/8" | 1/16" | 370 lbs. @ 120 rpm | 890 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 3/8" | 7/8" | 1/8" | 370 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||
7/16" | 3/4" | 9/16" | 1/16" | 370 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 00000 |
932 Bearing Bronze | ||||||||
For 6mm Shaft Dia. | ||||||||
10mm | 10mm | 14mm | 2mm | 370 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | -350° to 450° | 00000000 | 00000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Metric Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||||
18mm | 12mm | 24mm | 3mm | 370 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||||||
5/16" | 1/2" | 7/16" | 1/16" | 370 lbs. @ 120 rpm | 490 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
For 1/4" Shaft Dia. | ||||||||||
3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
For 3/8" Shaft Dia. | ||||||||||
1/2" | 1/4" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 900 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||||||
For 6mm Shaft Dia. | ||||||||||
9mm | 10mm | 12mm | 1.5mm | 370 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 0000 |
10mm | 10mm | 14mm | 2mm | 370 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 000000 | 0000 |
For 10mm Shaft Dia. | ||||||||||
13mm | 6mm | 16mm | 1.5mm | 370 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | Required | -350° to 450° | __ | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |
For 3/8" Shaft Dia. | |||||||||
1/2" | 1/4" | 11/16" | 1/16" | 370 lbs. @ 120 rpm | 900 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 00000 |
Extreme-Temperature Dry-Running Mounted Sleeve Bearings
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Graphalloy Bearings with Cast Iron Housing | |||||||||||||
1/2" | 1 5/16" | 2 17/32" | 5" | 1 1/2" | 1" | 3/4" | 1/2" | 3 3/4" | 370 lbs. @ 120 rpm | -400° to 750° | Self Aligning | 0000000 | 0000000 |
High-Speed Oil-Embedded Mounted Sleeve Bearings
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
Without Oil Cup | ||||||||||||||
3/8" | 9/16" | 1 1/8" | 2 5/16" | 1/2" | 1/2" | 17/64" | 5/16" | 1 3/4" | 370 lbs. @ 120 rpm | -40° to 240° | Self Aligning | Lubricated | 000000 | 00000 |