3,800 lbs. @ 30 rpm Dynamic Radial Load Capacity Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 1 1/8" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
1 3/8"	1 3/4"	3,800 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 28mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
32mm	22mm	3,800 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000

High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.

Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID	Length	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 28mm Shaft Dia.
32mm	22mm	3,800 lbs. @ 30 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Use these bearings for frequent starts and stops in high-load applications. Startup friction causes these bearings to release a thin layer of oil that contains PTFE to lubricate the bearing’s surface. All have more iron content than standard oil-embedded bearings to handle heavier loads and higher shock loads, but operate at lower speeds.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 28 mm Shaft Dia.
32	22	3,800 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bronze bearings are porous and embedded with graphite for continuous lubrication.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

841 Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 1 3/16" Shaft Dia.
1 1/2"	2"	3,800 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	000000