About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
7/8" | 3" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
15/16" | 3" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
1" | 3" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
1 1/8" | 3" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
1 1/4" | 3" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||
1 1/4" | 2 1/4" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1 3/8" | 2 1/4" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
7/8" | 1 1/2" | 4,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
15/16" | 1 1/2" | 4,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
1" | 1 1/2" | 4,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
1 1/8" | 1 1/2" | 4,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||
1 1/8" | 1" | 4,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
1" | 1 1/2" | 1 1/8" | 1/8" | 4,500 lbs. @ 60 rpm | 2,200 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | |||||||||
1 1/4" | 1" | 1 1/2" | 1/8" | 4,500 lbs. @ 60 rpm | 4,400 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |