About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 3/8" | 460 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with 304 Stainless Steel Shell and Silicone Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||||
36mm | 30mm | 30mm | 460 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 0000000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 15mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
19mm | 10mm | 460 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
7/8" | 1" | 460 lbs. @ 60 rpm | Gold | -400° to 550° | 0000000 | 000000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW and acetal bearings, and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||
7/8" | 3/4" | 460 lbs. @ 60 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Glass-filled PTFE bearings have the same low-friction properties as PTFE bearings, along with increased load capacity.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
Glass-Filled PTFE Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
7/8" | 3/4" | 460 lbs. @ 60 rpm | White | -350° to 500° | 0000000 | 000000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||
0.63" | 7/8" | 3/4" | 460 lbs. @ 60 rpm | Maroon | -400° to 550° | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1" | 1/8" | 460 lbs. @ 60 rpm | 225 lbs. @ 60 rpm | Gold | -400° to 550° | 0000000 | 000000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW bearings and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
23/32" | 3/4" | 15/16" | 3/64" | 460 lbs. @ 60 rpm | 260 lbs. @ 60 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 000000 |
7/8" | 3/4" | 1" | 1/8" | 460 lbs. @ 60 rpm | 300 lbs. @ 60 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
Water-Resistant Dry-Running Flanged Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
23/32" | 3/4" | 15/16" | 3/64" | 460 lbs. @ 60 rpm | 260 lbs. @ 60 rpm | Maroon | -400° to 550° | 00000000 | 000000 |
7/8" | 3/4" | 1" | 1/8" | 460 lbs. @ 60 rpm | 300 lbs. @ 60 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
Metric Rulon LR Plastic Bearings | |||||||||
For 15mm Shaft Dia. | |||||||||
19mm | 20mm | 23mm | 2mm | 460 lbs. @ 60 rpm | 260 lbs. @ 60 rpm | Maroon | -400° to 500° | 00000000 | 00000 |
Extreme-Temperature Dry-Running Mounted Sleeve Bearings
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Graphalloy Bearings with Cast Iron Housing | |||||||||||||
5/8" | 1 5/16" | 2 17/32" | 5" | 1 1/2" | 1" | 3/4" | 1/2" | 3 3/4" | 460 lbs. @ 60 rpm | -400° to 750° | Self Aligning | 0000000 | 0000000 |