About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 16mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
20mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
For 20mm Shaft Dia. | |||||||
24mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
25mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
26mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
For 25mm Shaft Dia. | |||||||
35mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||
30mm | 30mm | 4,650 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||||||
32mm | 30mm | 39mm | 3.5mm | 4,650 lbs. @ 60 rpm | 3,350 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 000000 |