About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||
8mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 000000 |
For 6mm Shaft Dia. | ||||||
9mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
10mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||
11mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
12mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
16mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 10mm Shaft Dia. | ||||||
14mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
18mm | 16mm | 50 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | ||||||
For 3/16" Shaft Dia. | ||||||
5/16" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1/4" Shaft Dia. | ||||||
3/8" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 5/16" Shaft Dia. | ||||||
7/16" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 3/8" Shaft Dia. | ||||||
1/2" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 7/16" Shaft Dia. | ||||||
9/16" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | ||||||
For 5/16" Shaft Dia. | ||||||
7/16" | 5/8" | 50 lbs. @ 120 rpm | White | -20° to 180° | 000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 5/8" | 50 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
Metric Acetal Bearings | ||||||
For 10mm Shaft Dia. | ||||||
16mm | 16mm | 50 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
For 12mm Shaft Dia. | ||||||
16mm | 15mm | 50 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Bearings | ||||||
---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||
5/16" | 3/8" | 50 lbs. @ 120 rpm | Gold | -400° to 550° | 0000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 1/4" | 50 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||
16mm | 20mm | 50 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
18mm | 20mm | 50 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
MDS-Filled Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | |||||||||
5/16" | 1/2" | 3/8" | 3/64" | 50 lbs. @ 120 rpm | 23 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 00000 |
For 1/4" Shaft Dia. | |||||||||
3/8" | 1/2" | 9/16" | 3/64" | 50 lbs. @ 120 rpm | 38 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||||
7/16" | 1/2" | 9/16" | 1/16" | 50 lbs. @ 120 rpm | 33 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 3/8" Shaft Dia. | |||||||||
1/2" | 1/2" | 5/8" | 1/16" | 50 lbs. @ 120 rpm | 34 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 7/16" Shaft Dia. | |||||||||
9/16" | 1/2" | 11/16" | 1/16" | 50 lbs. @ 120 rpm | 34 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||||
5/8" | 1/2" | 7/8" | 1/16" | 50 lbs. @ 120 rpm | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | |||||||||
For 1/2" Shaft Dia. | |||||||||
5/8" | 5/8" | 3/4" | 1/16" | 50 lbs. @ 120 rpm | 28 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
5/8" | 5/8" | 3/4" | 3/32" | 50 lbs. @ 120 rpm | 28 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
For 10mm Shaft Dia. | |||||||||
16mm | 16mm | 22mm | 3mm | 50 lbs. @ 120 rpm | 46 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||||||
16mm | 15mm | 24mm | 2mm | 50 lbs. @ 120 rpm | 47 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
Thermoplastic-Blend Bearings | |||||||||
For 12mm Shaft Dia. | |||||||||
14mm | 4.5mm | 18mm | 1mm | 50 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||||
13.6mm | 12.8mm | 18mm | 0.8mm | 50 lbs. @ 120 rpm | 34 lbs. @ 120 rpm | White | 0° to 200° | 0000000 | 00000 |
High-Speed Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can. The material is self-lubricating for less wear and longer life in your system. These bearings swivel to compensate for small amounts of shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Diameter | Height | Length | Width | Bearing Width | Flange Thickness | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
PTFE-Filled Acetal Plastic Bearings with Black-Oxide Steel Housing | ||||||||||||
1/4" | 7/8" | 1 51/64" | 9/32" | 15/64" | 3/64" | 7/32" | 1 7/32" | 60 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |