About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
7/16" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/2" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
11/16" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/8" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/16" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
3/8" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 000 |
1/2" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 000000 | 00000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 0000 |
3/4" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 0000 |
Panel-Mount Oil-Embedded Sleeve Bearings
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. On startup, friction causes the bronze to release a thin layer of oil on the bearing’s surface. Not for use with plastic panels.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Lg. | Spline OD | For Min. Sheet Metal Thick. | Dynamic Radial Load Capacity | Misalignment Capability | Lubrication | Lubricant | Temperature Range, °F | Each | |
840 Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
0.64" | 0.87" | 0.06" | 500 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/8" | 1/2" | 500 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 00000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 5mm Shaft Dia. | |||||
7mm | 8mm | 500 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
For 10mm Shaft Dia. | |||||
12mm | 8mm | 500 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||
14mm | 8mm | 500 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||
3/8" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
7/16" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
1/2" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
11/16" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
3/4" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
5/16" | 1/2" | 500 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 00000 |
3/8" | 1/2" | 500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
1/2" | 1/2" | 500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1/2" | 7/8" | 1/16" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
5/8" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
11/16" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1/2" | 1" | 1/8" | 500 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 000000 | 00000 |
7/16" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 00000 |
11/16" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
3/4" | 1/2" | 1" | 1/8" | 500 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 0000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||||
5/8" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 500 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||||
3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1/2" | 7/8" | 1/8" | 500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 500 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
7/16" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | |||||||||
10mm | 12mm | 14mm | 2mm | 500 lbs. @ 120 rpm | 870 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
1/2" | 9/16" | 1 1/8" | 2 1/4" | 7/16" | 41/64" | 9/32" | 1 3/4" | 500 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 000000 | 000000 |
12mm | 19mm | 39.5mm | 82.5mm | 16mm | 16mm | 9mm | 63.5mm | 500 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
High-Speed Oil-Embedded Mounted Sleeve Bearings
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
Without Oil Cup | ||||||||||||||
1/2" | 9/16" | 1 1/8" | 2 5/16" | 1/2" | 1/2" | 17/64" | 5/16" | 1 3/4" | 500 lbs. @ 120 rpm | -40° to 240° | Self Aligning | Lubricated | 000000 | 00000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
1/4" | 9/16" | 1 1/8" | 2 3/4" | 1" | 1" | 15/32" | 5/16" | 2" | 500 lbs. @ 120 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |