About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6305 | 25mm | 62mm | 17mm | Steel | 5,000 | 2,550 | 16,200 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6305-2Z | 25mm | 62mm | 17mm | Steel | 5,000 | 2,600 | 11,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
Tapered Bore Self-Aligning Ball Bearings
For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static, lbs. | Maximum Speed, rpm | Lubrication | Misalignment Capability | Maximum Temperature, °F | Rate of Taper | ABEC Rating | Each | |
Open | ||||||||||||||
2208K | 40 | 80 | 23 | Steel | 5,000 | 1,650 | 7,500 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 0000000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | |||||||||||||||
1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Steel Crowned Rollers with Seal | |||||||||||||||
1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 57/64" | 1/32" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Ht. Adjustment Capability | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
1 5/8" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Steel Crowned Rollers with Seal | ||||||||||||||||
1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |