Ball Bearing Type Ball Bearing Type |
|---|
 |  |
| Standard | With Retaining Ring |
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
Lubrication Lubrication |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Show |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Hide |
|---|
Lubricant Lubricant |
|---|
|
Construction Construction |
|---|
|
Cage Material Cage Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.
Retaining
Ring
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6305-2Z | 25mm | 62mm | 17mm | 67.7 | 1.7 | Steel | 5,250 | 2,600 | 13,000 | Lubricated | -20° to 230° | ABEC-1 | 0000000 | 000000 |
Retaining
Ring
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6305-2RS | 25mm | 62mm | 17mm | 67.7 | 1.7 | Steel | 5,250 | 2,600 | 7,500 | Lubricated | -40° to 210° | ABEC-1 | 0000000 | 000000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
| 6305-2Z | 25 | 62 | 17 | Steel | 5,250 | 2,600 | 13,000 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 000000 |
Sealed | ||||||||||||
| 6305-2RS | 25 | 62 | 17 | Steel | 5,250 | 2,600 | 7,500 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 00000 |
Precision Needle-Roller Bearings
Install these bearings directly onto hardened and ground shafts. They have higher load capacity, speed, and accuracy than standard needle-roller bearings.
Sealed bearings block out dust and other contaminants.
Shaft liners allow you to use the bearing on unhardened and unground shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radial Load Cap., lbs. | Optional Shaft Liners | |||||||||||||
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range., °F | Each | For Shaft Dia. | Each | ||
Sealed | ||||||||||||||
| 7/8" | 1 3/8" | 1" | Steel | 5,250 | 6,000 | 4,400 | Lubricated | 12 | -30° to 250° | 0000000 | 000000 | 5/8" | 0000000 | 000000 |