Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 1 5/16" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
1 1/2"	2"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 175°	00000000	00000
1 5/8"	2"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 175°	00000000	00000
For 1 1/2" Shaft Dia.
1 3/4"	1 3/4"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
1 7/8"	1 3/4"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 1 3/4" Shaft Dia.
1 15/16"	1 1/2"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 175°	00000000	0000
2"	1 1/2"	5,250 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 30mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
38mm	30mm	5,250 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000
40mm	30mm	5,250 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000
For 40mm Shaft Dia.
50mm	30mm	5,250 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Use these bearings for frequent starts and stops in high-load applications. Startup friction causes these bearings to release a thin layer of oil that contains PTFE to lubricate the bearing’s surface. All have more iron content than standard oil-embedded bearings to handle heavier loads and higher shock loads, but operate at lower speeds.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 30 mm Shaft Dia.
38	30	5,250 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000
40	30	5,250 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000
For 40 mm Shaft Dia.
50	30	5,250 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bronze bearings are porous and embedded with graphite for continuous lubrication.

660 leaded bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 932 bronze bearings.

Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

Grooved

841 Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 1 5/16" Shaft Dia.
1 5/8"	2 1/2"	5,250 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	000000
660 Leaded Bronze Bearings
For 1 1/2" Shaft Dia.
1 3/4"	1"	5,250 lbs. @ 30 rpm	Grooved	-350° to 450°	00000000	00000

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 660 leaded bronze is sometimes called 932 bronze.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 1 1/2" Shaft Dia.
1 3/4"	1"	5,250 lbs. @ 30 rpm	Required	-350° to 450°	0000000	000000

High-Load Oil-Embedded Flanged Sleeve Bearings

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 30mm Shaft Dia.
38mm	30mm	46mm	4mm	5,250 lbs. @ 30 rpm	3,600 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
30 mm Shaft Dia.
38	30	46	4	5,250 lbs. @ 30 rpm	3,600 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	000000

High-Speed Oil-Embedded Mounted Sleeve Bearings

With Oil Cup

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.

Bearings with an oil cup have a reservoir that distributes additional oil onto the bearing. A self-closing hinged cover keeps out contaminants.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

		Overall				Mounting
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Bearing Wd.	Hole Lg.	Hole Wd.	Hole Ctr.-to-Ctr.	Dynamic Radial Load Cap.	Temp. Range, °F	Alignment Style	Lubrication		Each
SAE 841 Bronze Bearings with Steel Housing
With Oil Cup
1 1/2"	1 11/32"	2 7/8"	5 7/16"	1 3/4"	1 3/4"	25/32"	25/64"	3 7/8"	5,250 lbs. @ 30 rpm	-40° to 240°	Self Aligning	Lubricated	0000000	000000