About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
16 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
18 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 6mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
10mm | 16mm | 590 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
16 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
18 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 6 mm Shaft Dia. | |||||||
10 | 16 | 590 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
PEEK Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
15/32" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 000000 |
1/2" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
9/16" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||
3/4" | 3/4" | 590 lbs. @ 120 rpm | Black | -40° to 500° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||
10mm | 16mm | 590 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 000000 |
For 8mm Shaft Dia. | ||||||
10mm | 12mm | 590 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
12mm | 12mm | 590 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | ||||||||||
15mm | 16mm | 18mm | 1.5mm | 590 lbs. @ 120 rpm | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
17mm | 16mm | 22mm | 2.5mm | 590 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 16mm | 14mm | 2mm | 590 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | ||||||||||
15mm | 16mm | 18mm | 1.5mm | 590 lbs. @ 120 rpm | 430 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
17mm | 16mm | 22mm | 2.5mm | 590 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
6 mm Shaft Dia. | ||||||||||
10 | 16 | 14 | 2 | 590 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||||||
15mm | 16mm | 18mm | 1.5mm | 590 lbs. @ 120 rpm | 430 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
5/8" | 3/4" | 7/8" | 1/8" | 590 lbs. @ 120 rpm | 470 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 000000 |
For 3/8" Shaft Dia. | |||||||||
5/8" | 3/4" | 7/8" | 1/16" | 590 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
3/4" | 3/4" | 1" | 1/8" | 590 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
Chemical-Resistant Dry-Running Flanged Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
15/32" | 3/4" | 11/16" | 3/64" | 590 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 000000 |
1/2" | 3/4" | 5/8" | 1/16" | 590 lbs. @ 120 rpm | 250 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
5/8" | 3/4" | 7/8" | 1/8" | 590 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
19/32" | 3/4" | 7/8" | 3/64" | 590 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
3/4" | 3/4" | 1" | 1/8" | 590 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Black | -20° to 450° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 16mm | 14mm | 2mm | 590 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
For 8mm Shaft Dia. | ||||||||||
11mm | 12mm | 14mm | 1.5mm | 590 lbs. @ 120 rpm | 640 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
12mm | 12mm | 16mm | 2mm | 590 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 0000 |
For 12mm Shaft Dia. | ||||||||||
15mm | 8mm | 18mm | 1.5mm | 590 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 000000 | 0000 |
16mm | 8mm | 23mm | 3mm | 590 lbs. @ 120 rpm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
18mm | 8mm | 24mm | 3mm | 590 lbs. @ 120 rpm | 1,300 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |