About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Ball and Roller Bearings
More
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4 | 5/64" | 1/4" | 3/32" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4-2Z | 5/64" | 1/4" | 9/64" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
683-2Z | 3mm | 7mm | 3mm | 440C Stainless Steel | 70 | 20 | 75,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
692-2Z | 2mm | 6mm | 3mm | 440C Stainless Steel | 70 | 20 | 90,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
Inner Ring | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4-2Z | 5/64" | 1/4" | 9/64" | 0.157" | 0.172" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
6mm | 10mm | 2.5mm | 440C Stainless Steel | 70 | 24 | 50,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
Shielded | |||||||||||
6mm | 10mm | 3mm | 440C Stainless Steel | 70 | 24 | 50,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
High-Load Plastic Ball Bearings
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings. They’re commonly used in bottle-filling machines and other food-processing applications. The acetal body doesn’t absorb water, so it can operate in liquids or be washed down without losing strength. The balls are made of either glass or 316 stainless steel—both materials are corrosion resistant. Since there’s no metal-on-metal contact between the balls and the body, these bearings don’t require lubrication.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity, lbs. | 316 Stainless Steel Balls | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter | For Housing ID | Width | Ring Material | Dynamic | Static | Maximum Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
R8 | 1/2" | 1 1/8" | 7/16" | Acetal Plastic | 70 | 60 | 900 | Not Required | -40° to 180° | Not Rated | 00000000 | 000000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4 | 5/64" | 1/4" | 3/32" | 0.296" | 0.02" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
84 | 4mm | 8mm | 2mm | 9.2mm | 0.6mm | 440C Stainless Steel | 70 | 25 | 79,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
95 | 5mm | 9mm | 2.5mm | 10.2mm | 0.6mm | 440C Stainless Steel | 70 | 30 | 71,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
105 | 5mm | 10mm | 3mm | 11.2mm | 0.6mm | 440C Stainless Steel | 70 | 30 | 71,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4-2Z | 5/64" | 1/4" | 9/64" | 0.296" | 0.03" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 000000 |
84-2Z | 4mm | 8mm | 3mm | 9.2mm | 0.6mm | 440C Stainless Steel | 70 | 25 | 67,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
105-2Z | 5mm | 10mm | 4mm | 11.2mm | 0.8mm | 440C Stainless Steel | 70 | 30 | 60,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Extended
Inner Ring
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R1-4-2Z | 5/64" | 1/4" | 9/64" | 0.296" | 0.03" | 0.157" | 0.172" | 440C Stainless Steel | 70 | 20 | 80,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
Extreme-Temperature Threaded Track Rollers
Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Temp. Range, °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | |||||||||||
1" | 5/8" | 7/16" | 1" | 7/16"-20 | 1/2" | 100 | 70 | -450° to 750° | Plain | 0000000 | 0000000 |