About Ball and Roller Bearings
More
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6013-2Z | 65 | 100 | 18 | Steel | 7,150 | 5,600 | 7,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 0000000 |
Sealed | ||||||||||||
6013-2RS | 65 | 100 | 18 | Steel | 7,150 | 5,600 | 4,300 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
Self-Aligning Ball Bearings
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2208 | 40 | 80 | 23 | Steel | 7,150 | 2,200 | 11,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 0000000 |
Tapered Bore Self-Aligning Ball Bearings
For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static, lbs. | Maximum Speed, rpm | Lubrication | Misalignment Capability | Maximum Temperature, °F | Rate of Taper | ABEC Rating | Each | |
Open | ||||||||||||||
2306K | 30 | 72 | 27 | Steel | 7,150 | 1,950 | 8,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 0000000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
85mm | 120mm | 18mm | 7,150 | 6,650 | Not Rated | Not Rated | Not Rated | Not Rated | 6,300 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 0000000 |