Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
Bearing Trade Number Bearing Trade Number |
|---|
|
Seal Type Seal Type |
|---|
|
For Housing ID For Housing ID |
|---|
|
Roller Material Roller Material |
|---|
|
OD OD |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
Roller Profile Roller Profile |
|---|
 | Flat |
ID ID |
|---|
|
Roller Style Roller Style |
|---|
 |  |
| Threaded Stud | Shaft Mount |
With Seal With Seal |
|---|
|
Ring Material Ring Material |
|---|
|
Track Roller Type Track Roller Type |
|---|
 | Round |
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
Lubrication Lubrication |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Show |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Hide |
|---|
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
| 6906-2RS | 30mm | 47mm | 9mm | Steel | 7,200 | 1,100 | 7,700 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Corrosion-Resistant Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||
| 2" | 1 1/4" | 7/8" | 2" | 7/8"-14 | 1" | 1 13/64" | 1/32" | 1,400 | 6,700 | 7,200 | 250° | Needle Roller | 0000000 | 0000000 |
Chrome-Plated Steel Flat Rollers with Seal | ||||||||||||||
| 2" | 1 1/4" | 7/8" | 2" | 7/8"-14 | 1" | 1 13/64" | 1/32" | 1,200 | 8,200 | 7,200 | 250° | Needle Roller | 000000 | 000000 |
Corrosion-Resistant Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring. Rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||
| 2" | 1 1/4" | 5/8" | 1 5/16" | 1,400 | 17,000 | 7,200 | 250° | Needle Roller | 0000000 | 0000000 |