About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/16" | 5/16" | 75 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 5/32" Shaft Dia. | |||||||
7/32" | 1/4" | 75 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/4" | 1/4" | 75 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
8 | 5 | 75 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
8 | 5 | 75 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with 304 Stainless Steel Shell and Silicone Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||
9/16" | 3/4" | 3/4" | 75 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
8mm | 5mm | 75 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||
14mm | 25mm | 75 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 000000 |
16mm | 25mm | 75 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
15mm | 25mm | 75 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
16mm | 25mm | 75 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 3/8" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
For 3/16" Shaft Dia. | ||||||
1/4" | 1/4" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
5/16" | 1/4" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW and acetal bearings, and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||
3/8" | 1/4" | 75 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||||||
8mm | 5mm | 11mm | 1.5mm | 75 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||||||
8mm | 5mm | 11mm | 1.5mm | 75 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
841 bearing bronze bearings run at higher speeds than 863 iron-copper bearings. They’re also known as Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bearing Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | |||||||||||
8mm | 5mm | 11mm | 1.5mm | 75 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||
20mm | 20mm | 24mm | 2mm | 75 lbs. @ 120 rpm | 60 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 00000 |
For 10mm Shaft Dia. | |||||||||
13mm | 20mm | 16mm | 1.5mm | 75 lbs. @ 120 rpm | 28 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 0000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW bearings and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
3/8" | 1/4" | 9/16" | 1/32" | 75 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 000000 |
For 3/8" Shaft Dia. | ||||||||||
15/32" | 1/4" | 11/16" | 3/64" | 75 lbs. @ 120 rpm | 120 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
Water-Resistant Dry-Running Flanged Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
3/8" | 1/4" | 9/16" | 1/32" | 75 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 000000 |
For 3/8" Shaft Dia. | |||||||||
15/32" | 1/4" | 11/16" | 3/64" | 75 lbs. @ 120 rpm | 120 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
Corrosion-Resistant Dry-Running Mounted Sleeve Bearings
Use these UHMW bearings in wet, corrosive environments.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
UHMW Plastic Bearings with 304 Stainless Steel Housing | |||||||||||||
1/2" | 29/32" | 1 3/4" | 3 15/16" | 1 1/4" | 1 1/4" | 21/32" | 21/64" | 2 7/8" | 75 lbs. @ 120 rpm | -200° to 180° | Self Aligning | 0000000 | 000000 |