About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
1/2" | 7/8" | 80 lbs. @ 120 rpm | White | -10° to 220° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | ||||||
For 3/8" Shaft Dia. | ||||||
1/2" | 3/4" | 80 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
1/2" | 7/8" | 80 lbs. @ 120 rpm | Black | -40° to 170° | 000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 3/4" | 80 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
Metric Acetal Bearings | ||||||
For 12mm Shaft Dia. | ||||||
18mm | 25mm | 80 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
1/2" | 7/8" | 5/8" | 1/8" | 80 lbs. @ 120 rpm | 30 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | |||||||||
For 3/8" Shaft Dia. | |||||||||
1/2" | 3/4" | 5/8" | 1/16" | 80 lbs. @ 120 rpm | 34 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||||
5/8" | 3/4" | 7/8" | 1/16" | 80 lbs. @ 120 rpm | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
High-Speed Self-Aligning Dry-Running Flanged Sleeve Bearings
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They’re self-lubricating, so they’ll take on less wear for an increased lifespan. Acetal won’t warp or swell from exposure to water, so these bearings are good for use in washdown environments. These bearings swivel to compensate for a small amount of shaft misalignment. Designed for press-fit installation by hand—no tools required—they don’t need to be fitted into a housing. Mount them into injection-molded panels and mounts, thin sheet metal, or hard non-ductile materials.
For technical drawings and 3-D models, click on a part number.
For Shaft Diameter | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Misalignment Capability | Color | Temperature Range, °F | Each | |
PTFE-Filled Acetal Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/4" | 3/8" | 9/16" | 1/32" | 80 lbs. @ 120 rpm | 75 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 000000 |
6mm | 9.6mm | 14.3mm | 0.8mm | 80 lbs. @ 120 rpm | 80 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
High-Speed Dry-Running Mounted Sleeve Bearings
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings. They’re dry running, meaning they don’t require lubrication. These bearings swivel to compensate for small amounts of shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Diameter | Center Height | Height | Length | Width | Bearing Width | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
1/4" | 3/8" | 3/4" | 1 7/16" | 3/8" | 3/8" | 13/64" | 1 1/8" | 80 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
1/4" | 9/16" | 1 1/8" | 2 1/4" | 3/8" | 3/8" | 9/32" | 1 3/4" | 80 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
6mm | 9.5mm | 19.1mm | 36.5mm | 9.7mm | 9.7mm | 5.2mm | 28.6mm | 80 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |