About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1 1/2" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 000000 |
For 1 3/8" Shaft Dia. | |||||||
1 5/8" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | |||||||
1 3/4" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||
2" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
For 2" Shaft Dia. | |||||||
2 1/4" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 1 3/4" Shaft Dia. | |||||
1 15/16" | 1 1/2" | 9,500 lbs. @ 30 rpm | -320° to 530° | 00000000 | 000000 |
Multipurpose Dry-Running Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Bearings with seals block out dust and contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1 3/16" Shaft Dia. | ||||||
1 1/2" | 2" | 9,500 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than 863 iron-copper bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | ||||||||||
1 1/2" | 1" | 1 3/4" | 3/16" | 9,500 lbs. @ 30 rpm | 6,400 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 000000 |