System of Measurement System of Measurement |
---|
|
For Housing ID For Housing ID | Show |
---|
|
For Housing ID For Housing ID | Hide |
---|
Bearing Trade Number Bearing Trade Number |
---|

For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
![]() | Combined Radial, Thrust, and Moment |
Ball Bearing Type Ball Bearing Type |
---|
![]() | ![]() | ![]() |
Standard | Flanged | With Retaining Ring |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
Cage Material Cage Material |
---|
|
Construction Construction |
---|
|
Lubrication Lubrication |
---|
|
Maximum Speed Maximum Speed |
---|
Ring Material Ring Material |
---|
|
Ball Material Ball Material |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
About Linear Bearings
More
About Plain Bearings
More
About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6210 | 50mm | 90mm | 20mm | Steel | 6,650 | 4,600 | 7,100 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 000000 |
6308 | 40mm | 90mm | 23mm | Steel | 9,550 | 5,600 | 10,800 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6011-2Z | 55mm | 90mm | 18mm | Steel | 6,700 | 4,750 | 9,100 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000000 |
6210-2Z | 50mm | 90mm | 20mm | Steel | 6,650 | 4,650 | 7,100 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
6308-2Z | 40mm | 90mm | 23mm | Steel | 9,550 | 5,600 | 7,500 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6011-2RS | 55mm | 90mm | 18mm | Steel | 6,700 | 4,750 | 4,100 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
6210-2RS | 50mm | 90mm | 20mm | Steel | 8,200 | 5,400 | 4,300 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 00000 |
6308-2RS | 40mm | 90mm | 23mm | Steel | 9,550 | 5,600 | 4,800 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 00000 |
Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6210 | 50mm | 90mm | 20mm | Steel | 6,050 | 4,650 | 4,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
6308 | 40mm | 90mm | 23mm | Steel | 7,050 | 5,050 | 4,600 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
6011-2RS | 55mm | 90mm | 18mm | Steel | 4,900 | 4,100 | 4,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
6210-2RS | 50mm | 90mm | 20mm | Steel | 6,050 | 4,650 | 4,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
6308-2RS | 40mm | 90mm | 23mm | Steel | 7,050 | 5,050 | 4,600 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings


For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6210-2Z | 50 | 90 | 20 | Steel | 8,300 | 5,200 | 8,000 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 000000 |
6308-2Z | 40 | 90 | 23 | Steel | 9,500 | 5,350 | 8,500 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 00000 |
Sealed | ||||||||||||
6210-2RS | 50 | 90 | 20 | Steel | 8,300 | 5,200 | 4,800 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 00000 |
6308-2RS | 40 | 90 | 23 | Steel | 9,500 | 5,350 | 5,000 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 00000 |
Self-Aligning Ball Bearings

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
1210 | 50 | 90 | 20 | Steel | 5,100 | 1,800 | 6,300 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
1308 | 40 | 90 | 23 | Steel | 6,650 | 2,150 | 6,700 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2210 | 50 | 90 | 23 | Steel | 5,200 | 1,850 | 6,300 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2308 | 40 | 90 | 33 | Steel | 10,200 | 3,000 | 6,300 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
Electrically Insulated Ball Bearings

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing. The ceramic balls generate less heat than steel balls, so they require lubrication less frequently. Shields keep out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6210-2Z | 50 | 90 | 20 | Steel | 9,600 | 6,000 | 10,800 | Lubricated | -20° to 245° | ABEC-1 | 0000000 | 0000000 |
6308-2Z | 40 | 90 | 23 | Steel | 11,400 | 6,900 | 11,000 | Lubricated | -20° to 245° | ABEC-1 | 0000000 | 000000 |
Tapered Bore Self-Aligning Ball Bearings


For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static, lbs. | Maximum Speed, rpm | Lubrication | Misalignment Capability | Maximum Temperature, °F | Rate of Taper | ABEC Rating | Each | |
Open | ||||||||||||||
1210K | 50 | 90 | 20 | Steel | 5,100 | 1,800 | 6,300 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
1308K | 40 | 90 | 23 | Steel | 6,650 | 2,150 | 6,700 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
2210K | 50 | 90 | 23 | Steel | 5,200 | 1,850 | 6,300 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
2308K | 40 | 90 | 33 | Steel | 10,200 | 3,000 | 6,300 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
Permanently Lubricated Stainless Steel Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6210H-2RS | 50 | 90 | 20 | 440C Stainless Steel | 6,050 | 4,650 | 4,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 0000000 |
Set Screw Collar Ball Bearings



Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.
Bearings with a black-oxide steel ring have some corrosion resistance.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.
Flanged bearings have a flange that ensures proper positioning inside a tube or housing.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | ABEC Rating | Each | |
Sealed (Lubricated) | ||||||||||||||
Black-Oxide Steel—With Retaining Ring | ||||||||||||||
ER210 | 50mm | 90mm | 28.6mm | 62.7mm | 51.6mm | 96mm | 2.4mm | 7,850 | 5,200 | 3,550 | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
Steel—Flanged | ||||||||||||||
GYAE50RRB | 50mm | 90mm | 22mm | 62.7mm | 44.3mm | __ | __ | 8,800 | 5,100 | 3,500 | -65° to 250° | ABEC-1 | 0000000 | 000000 |
Clamp-On Collar Ball Bearings


Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold. Tighten the single screw on the locking collar around its inner ring on your shaft to center and secure the shaft in the bearing bore. The collar’s firm grip reduces vibration and noise in your system. The steel rings on these bearings have a black-oxide finish for some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||||
Black-Oxide Steel Ring | |||||||||||||||
ER210 | 50mm | 90mm | 29mm | 63mm | 52mm | 96mm | 2.4mm | 7,850 | 5,200 | 3,550 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
Washdown Clamp-On Collar Ball Bearings


Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.
Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Capacity, lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | OD | OD Tolerance | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
Nickel-Coated Steel Ring | |||||||||||||||
50mm | 90mm | 28.6mm | 81.8mm | Not Rated | 53.2mm | 96mm | 2.4mm | 7,850 | 5,200 | 1,500 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
Angular-Contact Thrust Ball Bearings



Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Open | ||||||||||||||
7210 | 50 | 90 | 20 | Steel | 8,450 | 6,400 | 8,500 | Required | 40° | -20° to 230° | ABEC-3 | __ | 0000000 | 0000000 |
7308 | 40 | 90 | 23 | Steel | 10,300 | 6,850 | 9,000 | Required | 40° | -20° to 230° | ABEC-3 | __ | 0000000 | 000000 |
Sealed | ||||||||||||||
7308-2RS | 40 | 90 | 23 | Steel | 11,900 | 7,750 | 4,500 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
Double Row | ||||||||||||||
Open | ||||||||||||||
3210 | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Required | 30° | -20° to 230° | ABEC-3 | __ | 00000000 | 000000 |
Shielded | ||||||||||||||
3210-2Z | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | __ | 00000000 | 000000 |
Sealed | ||||||||||||||
3210-2RS | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 4,800 | Lubricated | 30° | -20° to 230° | ABEC-3 | __ | 00000000 | 000000 |
Ultra-Thin Ball Bearings


These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
65mm | 90mm | 13mm | 3,900 | 3,600 | Not Rated | Not Rated | Not Rated | Not Rated | 8,400 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 000000 |
70mm | 90mm | 10mm | 2,700 | 2,650 | Not Rated | Not Rated | Not Rated | Not Rated | 8,100 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 00000 |
Shielded | ||||||||||||||
65mm | 90mm | 13mm | 3,900 | 3,600 | Not Rated | Not Rated | Not Rated | Not Rated | 7,100 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
70mm | 90mm | 10mm | 2,700 | 2,650 | Not Rated | Not Rated | Not Rated | Not Rated | 6,800 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
Precision Angular-Contact Thrust Ball Bearings

These bearings have angular raceways for combined thrust and radial loads—install them where precision tolerances are required for accuracy and high speeds. They’re often used in spindle applications. To handle thrust loads in both directions, they have a double-row construction. Pair them with cylindrical roller bearings to better handle radial loads. They have an open construction to dissipate heat efficiently.
For technical drawings and 3-D models, click on a part number.
Combined Load Capacity, lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static | Maximum Speed, rpm | Lubrication | Contact Angle | Temperature Range, °F | ABEC Rating | Each | |
Double Row | |||||||||||||
Open | |||||||||||||
BTW 55 | 55 | 90 | 44 | Steel | 6,750 | 17,950 | 7,500 | Required | 60° | -40° to 240° | ABEC-7 | 0000000 | 000000000 |
Chemical-Resistant Dry-Running Sleeve Bearings

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Fiberglass-backed PTFE are strong and vibration resistant. A layer of PTFE on the ID of the bearing reduces friction.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
Metric Fiberglass-Backed PTFE Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 80mm Shaft Dia. | ||||||
90mm | 60mm | 27,050 lbs. @ 10 rpm | Gray | -145° to 320° | 00000000 | 000000 |
Multipurpose Sleeve Bearings

These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 660 Leaded Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 75mm Shaft Dia. | ||||||
90mm | 100mm | 37,550 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
Crossed-Roller Bearings

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Features | Each | |
Open | |||||||||||
60 | 90 | 13 | Steel | 4,200 | 5,400 | 1,000 | Required | 0° to 230° | Lubrication Groove, Two Lubrication Holes | 0000000 | 0000000 |
Sealed | |||||||||||
60 | 90 | 13 | Steel | 4,200 | 5,400 | 800 | Lubricated | 0° to 210° | Lubrication Groove, Two Lubrication Holes | 0000000 | 000000 |
Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.
For technical drawings and 3-D models, click on a part number.
High-Speed Linear Sleeve Bearings

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
For technical drawings and 3-D models, click on a part number.
Bearings | External Retaining Rings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | Each | Pkg. of 1 | ||
Fixed Alignment | ||||||||||||
Ceramic-Lined 6061 Aluminum Bearings | ||||||||||||
60mm | 125mm | 90 mm | 95mm | 2,700 lbs. @ 100 fpm | 56,600 | 0.013mm to 0.05mm | -200° to 400° | Stainless Steel, Steel | 0000000 | 000000 | 000000000 | 00000 |