86 Products

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Shielded bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than shielded bearings.

For technical drawings and 3-D models, click on a part number.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Open bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

Bearings are 440C stainless steel for good corrosion resistance.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

For technical drawings and 3-D models, click on a part number.

These acetal bearings have good all-around corrosion and chemical resistance.

316 stainless steel balls have excellent corrosion resistance.

Glass balls have even more corrosion resistance than stainless steel balls.

For technical drawings and 3-D models, click on a part number.

These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings. They also have good chemical resistance and excellent corrosion resistance.

Choose glass or Torlon PAI plastic balls for applications that require completely nonmetal bearings or involve chemicals that could damage 316 stainless steel balls.

For technical drawings and 3-D models, click on a part number.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications. They also have excellent chemical and corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.

440 stainless steel bearings are more corrosion resistant than steel bearings.

Open bearings dissipate heat more efficiently than shielded bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Open bearings dissipate heat more efficiently than shielded bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

For technical drawings and 3-D models, click on a part number.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.

For technical drawings and 3-D models, click on a part number.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.