We will reply to your message within an hour.
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Replace worn or damaged wheel bearings to keep your equipment rolling.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.