We will reply to your message within an hour.
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
A metal shell adds strength.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
An aluminum shell adds strength.
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.
Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
Diameter is oversized to allow for finishing.
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.
Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.
Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Also known as trapezoidal-thread lead screws and nuts.
Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.
Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects.
Replace worn or damaged wheel bearings to keep your equipment rolling.
Reduce the inside diameter of a bearing to fit a particular axle size. Also known as spanner bushings.