System of Measurement System of Measurement |
---|
|
Mounted Bearing Type Mounted Bearing Type |
---|
![]() | ![]() |
Base Mount | Two-Bolt Flange Mount |
ID ID |
---|
Length Length | Show |
---|
|
Length Length | Hide |
---|
Bearing Material Bearing Material |
---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
|
Plain Bearing Type Plain Bearing Type |
---|
![]() | Sleeve |
Housing Material Housing Material |
---|
|
For Load Direction For Load Direction |
---|
![]() | Radial |
Alignment Style Alignment Style |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Maximum Temperature Maximum Temperature |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Linear Bearings
More
Dry-Running Mounted Sleeve Bearings

Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
6mm | 14.5mm | 28.5mm | 57mm | 11.2mm | 11.2mm | 7mm | 44.5mm | 700 lbs. @ 120 rpm | -40° to 280° | Self Aligning | 0000000 | 000000 |
8mm | 14.5mm | 28.5mm | 57mm | 11.2mm | 11.2mm | 7mm | 44.5mm | 700 lbs. @ 120 rpm | -40° to 280° | Self Aligning | 0000000 | 00000 |
10mm | 14mm | 28.5mm | 57mm | 16mm | 16mm | 7mm | 44.5mm | 1,000 lbs. @ 120 rpm | -40° to 280° | Self Aligning | 0000000 | 00000 |
12mm | 14.5mm | 28.5mm | 57mm | 16mm | 16mm | 7mm | 44.5mm | 1,000 lbs. @ 120 rpm | -40° to 280° | Self Aligning | 0000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
8mm | 14.5mm | 28.5mm | 57mm | 11.5mm | 11mm | 7mm | 44.5mm | 280 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
10mm | 14.5mm | 28.5mm | 57mm | 11.5mm | 11mm | 7mm | 44.5mm | 350 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Use needle-roller bearings with hardened and ground shafts.
Bearings with aluminum housing are more corrosion resistant than bearings with a cast iron housing.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.

Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Aluminum Housing—Shaft Mount Type: Press Fit | ||||||||||||||
6mm | 14.5mm | 28.5mm | 57mm | 11.2mm | 7mm | 44.5mm | 450 | 370 | 21,900 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
8mm | 14.5mm | 28.5mm | 57mm | 16.3mm | 7mm | 44.5mm | 610 | 580 | 17,700 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
10mm | 14.5mm | 28.5mm | 57mm | 16.3mm | 7mm | 44.5mm | 980 | 1,100 | 14,580 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange


Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
6mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 440 lbs. @ 120 rpm | -40° to 380° | Self Aligning | 0000000 | 000000 |
8mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 790 lbs. @ 120 rpm | -40° to 380° | Self Aligning | 0000000 | 00000 |
12mm | 28.5mm | 57mm | 16mm | 16mm | 4.8mm | 7mm | 44.5mm | 1,480 lbs. @ 120 rpm | -40° to 380° | Self Aligning | 0000000 | 00000 |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
8mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 44 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
10mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 44 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
12mm | 28.5mm | 57mm | 16mm | 16mm | 4.8mm | 7mm | 44.5mm | 60 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
SAE 840 Bronze Bearings with Aluminum Housing | |||||||||||||
8mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 5mm | 7mm | 44.5mm | 280 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
10mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 5mm | 7mm | 44.5mm | 350 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
Ready-Mount Bearing Housings

Mount bearings quickly by using these precision housings, which don’t require any machining. They support a shaft that’s perpendicular or parallel to their mounting surface and let you replace the bearings as needed. Made of aluminum, they’re lightweight, durable, and have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Ready-Mount Bearing Housings with Two-Bolt Flange

Quickly mount bearings in these precision-flanged housings, no machining required. They support a shaft that’s perpendicular or parallel to their mounting surface and let you replace the bearings as needed. Housings are made of aluminum so they’re lightweight and durable with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||
---|---|---|---|---|---|---|---|---|
For Bearing OD | Height | Length | Width | Flange Thickness | Hole Diameter | Hole Center-to-Center | Each | |
2014 Aluminum | ||||||||
For 16mm Bearing Width | ||||||||
14mm | 15mm | 57mm | 28mm | 4.5mm | 9/32" | 44mm | 00000000 | 000000 |
Corrosion-Resistant Flange-Mounted Linear Ball Bearings

The bearing, housing, and balls of these mounted bearings are stainless steel for excellent corrosion resistance. The flanged housing is good for vertical linear motion applications. All bearings are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.
For technical drawings and 3-D models, click on a part number.
Overall | Load Capacity, lbs. | Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Lg., mm | Wd., mm | Ht., mm | Flange Thick., mm | Bolt Circle Dia., mm | OD, mm | Dynamic | Static | Temperature Range, ° F | For Shaft Material | No. of | Dia., mm | Each | |
440C Stainless Steel Bearings with Square Flanged Housing | ||||||||||||||
12 | 57 | 32 | 32 | 6 | 32 | 21 | 180 | 350 | -4° to 248° | Stainless Steel, Steel | 4 | 4.5 | 00000000 | 0000000 |