About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 7/8" | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
7/16" | 7/8" | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||
1/2" | 7/8" | 540 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 0000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
1/2" | 7/8" | 650 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
5/8" | 7/8" | 650 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 7/8" | 870 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
11/16" | 7/8" | 870 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 7/8" | 870 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
3/4" | 7/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
13/16" | 7/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/8" | 7/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 7/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 7/8" | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 7/8" | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 13/16" Shaft Dia. | |||||||
1" | 7/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
1 1/8" | 7/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 15/16" Shaft Dia. | |||||||
1 3/16" | 7/8" | 1,600 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 1 1/8" Shaft Dia. | |||||||
1 1/4" | 7/8" | 1,950 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||||
1 1/2" | 7/8" | 2,150 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1 1/2" Shaft Dia. | |||||||
1 3/4" | 7/8" | 2,600 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 7/8" | 870 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
1/2" | 7/8" | 970 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 7/8" | 970 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
3/4" | 7/8" | 1,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
1" | 7/8" | 1,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
High-Load Dry-Running Sleeve Bearings
with 17-4 PH Stainless
Steel Shell
A metal shell adds strength.
PTFE bearings with 17-4 PH stainless steel shell have the highest load capacity of any sleeve bearing we offer. They handle shock loads and are chemical resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings with 17-4 PH Stainless Steel Shell | ||||||
---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
5/8" | 7/8" | 6,650 lbs. @ 40 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 000000 | 0000000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Graphalloy bearings perform at extreme temperatures and under water. They are electrically conductive and wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
3/8" | 7/8" | 350 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
1/2" | 7/8" | 520 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 7/8" | 700 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
For 5/8" Shaft Dia. | ||||||
3/4" | 7/8" | 870 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
1" | 7/8" | 1,050 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
Graphalloy | ||||||
For 5/8" Shaft Dia. | ||||||
1" | 7/8" | 410 lbs. @ 60 rpm | Embedded | -450° to 750° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||
1/2" | 7/8" | 55 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
Multipurpose Dry-Running Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
For 7/8" Shaft Dia. | ||||||
---|---|---|---|---|---|---|
1 1/4" | 7/8" | 1,350 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
3/8" | 7/8" | 870 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
1/2" | 7/8" | 1,300 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 7/8" | 1,750 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 5/8" Shaft Dia. | ||||||
3/4" | 7/8" | 2,150 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
1" | 7/8" | 2,600 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
7/16" | 7/8" | 9/16" | 1/16" | 970 lbs. @ 120 rpm | 330 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
1/2" | 7/8" | 5/8" | 1/8" | 80 lbs. @ 120 rpm | 30 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | |||||||||
For 3/8" Shaft Dia. | |||||||||
1/2" | 7/8" | 5/8" | 1/8" | 150 lbs. @ 120 rpm | 55 lbs. @ 120 rpm | Black | -20° to 210° | 00000000 | 0000 |
Press-Fit Drill Bushings
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.0938" ID | ||||||||||||
3/16" | 7/8" | 3/32" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |
Tolerance | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.6001" ID | ||||||||||||
1" | 7/8" | 19/32" | 0.0001" to 0.0005" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 0000000 | 000000 | 000000 | 00000 |
Press-Fit Drill Bushings with Head
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole. Drill bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | OD | Thick. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.75" ID | ||||||||||||||
1" | 7/8" | 3/4" | 1 1/8" | 1/8" | 0.0001" to 0.0006" | 0.0015" to 0.0018" | -0.01" to 0.01" | HL | Steel | Rockwell C61 | 000000000 | 000000 | 000000 | 000000 |
1" ID | ||||||||||||||
1 3/8" | 7/8" | 1" | 1 1/2" | 1/8" | 0.0002" to 0.0007" | 0.0018" to 0.0022" | -0.01" to 0.01" | HL | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
Wheel Bearings
Replace worn or damaged wheel bearings to keep your equipment rolling. Use flanged bearings and ball bearings in pairs. Change the axle diameter with wheel reducer bushings (sold separately).
Note: Not for use in towing applications.
For impact-resistant tapered roller bearings, as well as other bearing materials and sizes, please see Ball and Roller Bearings and Sleeve Bearings. Ball bearings require minimal effort to start rolling and are best for low speeds.
Retaining washers hold roller bearings in place.
For technical drawings and 3-D models, click on a part number.
For Axle Dia. | OD | Lg. | Each | |
Ball Bearings | ||||
---|---|---|---|---|
5/16" | 1 1/8" | 7/8" | 0000000 | 00000 |