Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
15mm | 19mm | 39.5mm | 82.5mm | 20mm | 19.8mm | 8.5mm | 63.5mm | 4,950 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 000000 |
16mm | 19mm | 39.5mm | 82.5mm | 19.8mm | 19.8mm | 8.5mm | 63.5mm | 4,950 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
12mm | 19mm | 39.5mm | 82.5mm | 16mm | 16mm | 9mm | 63.5mm | 500 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
15mm | 19mm | 39.5mm | 82.5mm | 19.5mm | 19.4mm | 9mm | 63.5mm | 930 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
16mm | 19mm | 39.5mm | 82.5mm | 19.5mm | 19.4mm | 8.5mm | 63.5mm | 990 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
18mm | 19mm | 39.5mm | 82.5mm | 22.5mm | 22.5mm | 8.5mm | 63.5mm | 1,250 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
20mm | 19mm | 39.5mm | 82.5mm | 22.5mm | 21.5mm | 9mm | 63.5mm | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Use needle-roller bearings with hardened and ground shafts.
Bearings with aluminum housing are more corrosion resistant than bearings with a cast iron housing.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Aluminum Housing—Shaft Mount Type: Press Fit | ||||||||||||||
12mm | 19mm | 39.5mm | 82.5mm | 20mm | 8.7mm | 63.5mm | 1,100 | 1,350 | 12,420 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
15mm | 41mm | 82.5mm | 19.5mm | 19.5mm | 6.4mm | 10.5mm | 63.5mm | 5,100 lbs. @ 60 rpm | -40° to 380° | Self Aligning | 0000000 | 000000 |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
16mm | 41mm | 82.5mm | 19.5mm | 19.5mm | 6.4mm | 10.5mm | 63.5mm | 145 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
20mm | 41mm | 82.5mm | 21.5mm | 21.5mm | 6.4mm | 10.5mm | 63.5mm | 160 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
12mm | 41.5mm | 82.5mm | 16mm | 16mm | 6.5mm | 10.5mm | 63.5mm | 510 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
15mm | 41.5mm | 82.5mm | 19.5mm | 20mm | 6.5mm | 10.5mm | 63.5mm | 900 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
16mm | 41.5mm | 82.5mm | 19.5mm | 20mm | 6.5mm | 10.5mm | 63.5mm | 960 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
18mm | 41.5mm | 82.5mm | 22.5mm | 21.5mm | 6.5mm | 10.5mm | 63.5mm | 1,250 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |