System of Measurement System of Measurement |
|---|
|
Linear Bearing Component Linear Bearing Component |
|---|
 |  |
| Bearing in Housing | Housing |
Length Length | Show |
|---|
|
Length Length | Hide |
|---|
For Shaft Type For Shaft Type |
|---|
 |  |
| Round | Round with Support Rail |
Housing Type Housing Type |
|---|
| Base Mount |
For Shaft Material For Shaft Material |
|---|
|
Alignment Style Alignment Style |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Lubrication Lubrication |
|---|
|
Housing Material Housing Material |
|---|
|
Number of Mounting Holes Number of Mounting Holes |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
|
About Linear Bearings
More
About Plain Bearings
More
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Fiberglass-backed PTFE are strong and vibration resistant. A layer of PTFE on the ID of the bearing reduces friction.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
Metric Fiberglass-Backed PTFE Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 70mm Shaft Dia. | ||||||
| 80mm | 90mm | 40,600 lbs. @ 10 rpm | Gray | -145° to 320° | 00000000 | 0000000 |
Mounted Linear Ball Bearings
Bearings are for use with round end-supported shafts. All have end seals to keep lubricant in and dirt out.
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Overall, mm | Load Capacity, lbs. | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | Lg. | Wd. | Ht. | Center Ht., mm | Dynamic | Static | Temperature Range, ° F | For Shaft Material | No. of | Thread Size | Each | |
Steel Bearings with 6061 Aluminum Housing | ||||||||||||
| 40 | 90 | 102 | 78 | 40 | 480 | 900 | -4° to 176° | Stainless Steel, Steel | 4 | M10 × 1.5 | 0000000 | 0000000 |
High-Load Mounted Linear Ball Bearings
Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer. They are for use with round end-supported shafts. End seals keep lubricant in and dirt out.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall, mm | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | Lg. | Wd. | Ht. | Center Ht., mm | Dynamic Load Capacity, lbs. | Max. Temperature, °F | For Shaft Material | No. of | Dia., mm | Each | |
Acetal Bearings with Steel Balls in 6061 Aluminum Housing | |||||||||||
| 40 | 90 | 102 | 75 | 40 | 3,050 | 185° | Steel, Stainless Steel | 4 | 8.7 | 0000000 | 0000000 |
Mounted Linear Sleeve Bearings
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. All are for use with round end-supported shafts.
Self Aligning—Bearings compensate for shaft misalignment.
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 40mm | 0.013mm | 90mm | 102mm | 78mm | 40mm | 1,000 lbs. @ 100 fpm | 18,600 | -400° to 375° | Aluminum, Stainless Steel, Steel | 4 | 8.7mm | 00000000 | 0000000 |
Fixed Alignment | |||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 40mm | 0.013mm | 90mm | 102mm | 78mm | 40mm | 1,000 lbs. @ 100 fpm | 18,600 | -400° to 375° | Aluminum, Stainless Steel, Steel | 4 | 8.7mm | 0000000 | 000000 |
High-Speed Mounted Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Use these bearings with round end-supported shafts. All have end seals to keep lubricant in and dirt out. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
Self-aligning bearings compensate for shaft misalignment.
Use fixed-alignment bearings where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Center Ht. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 40mm | 90mm | 102mm | 78mm | 40mm | 2,000 lbs. @ 100 fpm | 18,600 | 0.013mm to 0.05mm | -400° to 400° | Aluminum, Steel | 4 | 10mm | 0000000 | 0000000 |
Fixed Alignment | |||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 40mm | 90mm | 102mm | 78mm | 40mm | 2,000 lbs. @ 100 fpm | 18,600 | 0.013mm to 0.05mm | -400° to 400° | Aluminum, Steel | 4 | 10mm | 0000000 | 000000 |
Mounted Linear Sleeve Bearings for Support Rail Shafts
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. Mount them on a support rail shaft for applications requiring maximum rigidity.
Self Aligning—Bearings compensate for shaft misalignment.
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Wd. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning | ||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 40mm | -0.038mm to -0.013mm | 90mm | 90mm | 72mm | 42mm | 19mm | 1,000 lbs. @ 100 fpm | 18,600 | -400° to 375° | Aluminum, Stainless Steel, Steel | 4 | 10mm | 00000000 | 0000000 |
Fixed Alignment | ||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 40mm | -0.038mm to -0.013mm | 90mm | 90mm | 72mm | 42mm | 19mm | 1,000 lbs. @ 100 fpm | 18,600 | -400° to 375° | Aluminum, Stainless Steel, Steel | 4 | 10mm | 00000000 | 000000 |
High-Speed Mounted Linear Sleeve Bearings for Support Rail Shafts
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Mount these bearings on a support rail shaft for applications requiring maximum rigidity. End seals keep contaminants out. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Center Ht. | Wd. | Dynamic Load Cap. | Static Load Cap., lbs. | Shaft Clearance | Temp. Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | ||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 40mm | 90mm | 90mm | 72mm | 42mm | 19mm | 1,000 lbs. @ 100 fpm | 18,600 | 0.013mm to 0.05mm | -400° to 400° | Stainless Steel, Steel | 4 | 10mm | 0000000 | 0000000 |
Fixed Alignment with 2° Misalignment Capability | ||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 40mm | 90mm | 90mm | 72mm | 42mm | 19mm | 1,000 lbs. @ 100 fpm | 18,600 | 0.013mm to 0.05mm | -400° to 400° | Stainless Steel, Steel | 4 | 10mm | 0000000 | 000000 |
Linear Bearing Housings
Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Bearing OD | For Max. Bearing Lg. | Lg. | Wd. | Ht. | Center Ht. | No. of | Dia. | Each | |
6063 Aluminum | |||||||||
For One Bearing | |||||||||
| 40mm | 80mm | 90mm | 102mm | 78mm | 40mm | 4 | 10mm | 0000000 | 000000 |