For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
Linear Bearing Component Linear Bearing Component |
|---|
 | Bearing |
Bearing Type Bearing Type |
|---|
 | Ball |
Length Length |
|---|
OD OD |
|---|
ID ID |
|---|
For Shaft Type For Shaft Type |
|---|
 | Round |
For Shaft Material For Shaft Material |
|---|
|
Bearing Material Bearing Material |
|---|
|
Alignment Style Alignment Style |
|---|
|
Ball Material Ball Material |
|---|
|
Retaining Ring Groove End-to-End Length Retaining Ring GrooveEnd-to-End Length |
|---|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
For Minimum Steel Shaft Hardness For Minimum SteelShaft Hardness |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Lubrication Lubrication |
|---|
|
Static Load Capacity Static Load Capacity |
|---|
|
For Minimum Stainless Steel Shaft Hardness For Minimum StainlessSteel Shaft Hardness |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Linear Bearings
More
Linear Ball Bearings
Bearing with Retaining Ring Grooves
Bearing Without Retaining Ring Grooves
Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).
Bearings with end seals keep lubricant in and dust out.
Bearings with stainless steel balls are more corrosion resistant than bearings with steel balls.
Self-aligning bearings compensate for shaft misalignment.
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Self Aligning with 0.5° Misalignment Capability
Bearings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | |||||||||||
| For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic | Static | Max. Temp., °F | For Shaft Material | Each | Each | ||
Acetal Bearings with Stainless Steel Balls | ||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5010" | 0.511" | No | 42 | 25 | 185° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 7/8" | 0.6250" - 0.6255" | 0.699" | No | 70 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8755" | 1.032" | Yes | 185 | Not Rated | 185° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1" | Yes | 430 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1258" | 1.112" | Yes | 290 | 260 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2505" | 1.285" | Yes | 790 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.272" | Yes | 430 | 370 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5630" | 1.901" | Yes | 1,300 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.886" | Yes | 810 | 720 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0008" | 2.031" | Yes | 1,600 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0012" | 2.011" | Yes | 1,400 | 1,100 | 176° | Stainless Steel, Steel | 000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3760" | 2.442" | Yes | 2,700 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.422" | Yes | 2,000 | 1,500 | 176° | Stainless Steel, Steel | 000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0012" | 3.206" | Yes | 3,500 | 2,700 | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
Acetal Bearings with Steel Balls | ||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5007" | 0.515" | Yes | 35 | 25 | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 3/8" | 7/8" | 0.6250" - 0.6257" | 0.703" | Yes | 55 | 40 | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8758" | 1.032" | Yes | 260 | 200 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1258" | 1.112" | Yes | 290 | 260 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.272" | Yes | 430 | 370 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.886" | Yes | 810 | 720 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0012" | 2.011" | Yes | 1,400 | 1,100 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.422" | Yes | 2,000 | 1,500 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
Fixed Alignment
Bearings | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | ||||||||||||
| For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic | Static | Min. Temp., °F | Max. Temp., °F | For Shaft Material | Each | Each | ||
440C Stainless Steel Bearings with Stainless Steel Balls | |||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5005" | 0.51" | Yes | 45 | 60 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 7/8" | 0.6250" - 0.6255" | 0.64" | Yes | 50 | 70 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8755" | 0.96" | Yes | 110 | 175 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1.1" | Yes | 170 | 265 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2505" | 1.17" | Yes | 190 | 305 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5630" | 1 3/4" | Yes | 220 | 350 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0010" | 2" | Yes | 350 | 615 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3760" | 2.41" | Yes | 490 | 900 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0010" | 3.19" | Yes | 855 | 1,700 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
Steel Bearings with Steel Balls | |||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5007" | 0.51" | Yes | 45 | 60 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 1 3/8" | 0.5000" - 0.5007" | 1.02" | Yes | 70 | 115 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 7/8" | 0.6250" - 0.6257" | 0.64" | Yes | 50 | 70 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 1 19/32" | 0.6250" - 0.6257" | 1.27" | Yes | 75 | 140 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8758" | 0.96" | Yes | 115 | 175 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 2 3/8" | 0.8750" - 0.8758" | 1.93" | Yes | 180 | 350 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1.1" | Yes | 170 | 265 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 5/8" | 2 13/16" | 1.1250" - 1.1258" | 2.21" | Yes | 275 | 525 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.17" | Yes | 190 | 305 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 3/4" | 3 3/32" | 1.2500" - 1.2510" | 2.33" | Yes | 305 | 615 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.76" | Yes | 220 | 350 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 4 9/32" | 1.5625" - 1.5635" | 3.51" | Yes | 350 | 705 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0010" | 2.01" | Yes | 350 | 615 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 5" | 2.0000" - 2.0012" | 4.01" | Yes | 560 | 1,200 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.41" | Yes | 490 | 900 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 5 11/16" | 2.3750" - 2.3762" | 4.82" | Yes | 770 | 1,800 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0010" | 3.19" | Yes | 855 | 1,700 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 00000 |
Fixed Alignment–Metric
Bearings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | |||||||||||
| For Shaft Dia., mm | Overall Lg., mm | For Housing ID, mm | Retaining Ring Groove End-to-End Lg., mm | With End Seals | Dynamic | Static | Temperature Range, °F | For Shaft Material | Each | Each | ||
440C Stainless Steel Bearings with Stainless Steel Balls | ||||||||||||
| 3 | 10 | 7.000 - 7.015 | __ | No | 15 | 20 | -4° to 176° | Stainless Steel, Steel | 00000000 | 000000 | 000000 | 00 |
| 4 | 12 | 8.000 - 8.015 | __ | No | 15 | 25 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000 | 00 |
| 5 | 15 | 10.000 - 10.018 | 10.2 | Yes | 35 | 45 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 00000 |
| 6 | 19 | 12.000 - 12.018 | 13.5 | Yes | 45 | 55 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 8 | 25 | 16.000 - 16.018 | 16.5 | Yes | 55 | 90 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 10 | 29 | 19.000 - 19.021 | 22 | Yes | 80 | 120 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 12 | 30 | 21.000 - 21.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000000 | 00000 |
| 13 | 32 | 23.000 - 23.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 16 | 36 | 26.000 - 26.021 | 24.9 | Yes | 125 | 200 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 20 | 45 | 32.000 - 32.025 | 31.5 | Yes | 190 | 305 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 25 | 58 | 40.000 - 40.025 | 44.1 | Yes | 220 | 350 | -4° to 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 30 | 68 | 47.000 - 47.025 | 52.1 | Yes | 350 | 615 | -4° to 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
Steel Bearings with Steel Balls | ||||||||||||
| 3 | 10 | 7.000 - 7.015 | __ | No | 15 | 20 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 000000 | 00 |
| 4 | 12 | 8.000 - 8.015 | __ | No | 15 | 25 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 000000 | 00 |
| 5 | 15 | 10.000 - 10.018 | 10.2 | Yes | 35 | 45 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 6 | 19 | 12.000 - 12.018 | 13.5 | Yes | 45 | 55 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 8 | 25 | 16.000 - 16.018 | 16.5 | Yes | 55 | 90 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 10 | 29 | 19.000 - 19.021 | 22 | Yes | 80 | 120 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 12 | 30 | 21.000 - 21.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000000 | 00000 |
| 13 | 32 | 23.000 - 23.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 16 | 36 | 26.000 - 26.021 | 24.9 | Yes | 125 | 200 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 20 | 45 | 32.000 - 32.025 | 31.5 | Yes | 190 | 305 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 25 | 58 | 40.000 - 40.025 | 44.1 | Yes | 220 | 350 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 30 | 68 | 47.000 - 47.025 | 52.1 | Yes | 350 | 615 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 35 | 70 | 52.000 - 52.030 | 49.5 | Yes | 375 | 705 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 40 | 80 | 62.000 - 62.030 | 60.6 | Yes | 485 | 900 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 50 | 100 | 75.000 - 75.030 | 77.6 | Yes | 855 | 1,780 | -4° to 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 0000 |