Clear All
System of Measurement System of Measurement |
|---|
|
Bearing Type Bearing Type |
|---|
 | Plain |
Linear Bearing Component Linear Bearing Component |
|---|
 | Bearing |
ID ID |
|---|
|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
For Shaft Material For Shaft Material |
|---|
|
For Maximum Housing ID (Metric) For MaximumHousing ID (Metric) |
|---|
|
|
For Minimum Housing ID (Metric) For MinimumHousing ID (Metric) |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Alignment Style Alignment Style |
|---|
|
Bearing Material Bearing Material |
|---|
|
Static Load Capacity Static Load Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
With End Seals With End Seals |
|---|
|
For Minimum Stainless Steel Shaft Hardness For Minimum StainlessSteel Shaft Hardness |
|---|
|
For Minimum Steel Shaft Hardness For Minimum SteelShaft Hardness |
|---|
|
With Retaining Ring Grooves With Retaining Ring Grooves |
|---|
|
For Shaft Smoothness For Shaft Smoothness |
|---|
|
About Linear Bearings
More
Ultra-Thin Linear Sleeve Bearings
When clearance is a concern, choose these ultra-thin sleeve bearings. All have a nonabrasive, chemical-resistant PTFE liner that’s coated with ceramic for added protection from corrosion. Use these fixed-alignment bearings on round end-supported shafts where shaft misalignment is unlikely. To install, slide them into a housing (not included).
For technical drawings and 3-D models, click on a part number.
| For Shaft Diameter, mm | Overall Length, mm | For Housing ID, mm | With Retaining Ring Grooves | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance, mm | Temperature Range, °F | For Shaft Material | Each | |
Fixed Alignment | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
PTFE-Lined 6061 Aluminum Bearings | ||||||||||
| 6 | 22 | 12.000 to 12.018 | No | 70 lbs. @ 100 fpm | 760 | 0.038 | -400° to 375° | Stainless Steel, Steel | 0000000 | 000000 |
| 8 | 24 | 15.000 to 15.018 | No | 80 lbs. @ 100 fpm | 1,100 | 0.038 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 10 | 26 | 17.000 to 17.018 | No | 250 lbs. @ 100 fpm | 1,500 | 0.038 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 12 | 28 | 19.000 to 19.021 | No | 250 lbs. @ 100 fpm | 1,950 | 0.038 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 14 | 28 | 21.000 to 21.021 | No | 300 lbs. @ 100 fpm | 2,250 | 0.038 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 16 | 30 | 24.000 to 24.021 | No | 350 lbs. @ 100 fpm | 2,750 | 0.05 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 20 | 30 | 28.000 to 28.021 | No | 450 lbs. @ 100 fpm | 3,450 | 0.05 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 25 | 40 | 35.000 to 35.025 | No | 600 lbs. @ 100 fpm | 5,800 | 0.05 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 30 | 50 | 40.000 to 40.025 | No | 900 lbs. @ 100 fpm | 8,700 | 0.0625 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 40 | 60 | 52.000 to 52.030 | No | 1,250 lbs. @ 100 fpm | 13,950 | 0.0625 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |
| 50 | 70 | 62.000 to 62.023 | No | 2,000 lbs. @ 100 fpm | 20,300 | 0.0625 | -400° to 375° | Stainless Steel, Steel | 0000000 | 00000 |