System of Measurement System of Measurement |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
Bearing Trade Number Bearing Trade Number |
|---|
|
Ring Material Ring Material |
|---|
|
Inner Ring Type Inner Ring Type |
|---|
| Standard |
For Load Direction For Load Direction |
|---|
 | Radial |
Ball Material Ball Material |
|---|
|
Lubrication Lubrication |
|---|
|
Shaft Mount Type Shaft Mount Type |
|---|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
Construction Construction |
|---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
|
ABEC Rating ABEC Rating |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
| 6202-2RS | 15mm | 35mm | 11mm | Steel | 1,750 | 840 | 12,700 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
| 80mm | 100mm | 10mm | 2,850 | 2,950 | Not Rated | Not Rated | Not Rated | Not Rated | 12,700 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 0000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
| 20mm | 26mm | 10mm | Steel | 1,400 | 1,800 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 000000 |
| 20mm | 26mm | 12mm | Steel | 1,900 | 2,700 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
| 20mm | 26mm | 20mm | Steel | 3,500 | 5,800 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 00000 |
| 20mm | 26mm | 30mm | Steel | 4,900 | 8,950 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |