System of Measurement System of Measurement |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
Lubrication Lubrication |
|---|
|
Construction Construction |
|---|
|
Cage Material Cage Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
ABEC Rating ABEC Rating |
|---|
|
Inner Ring Type Inner Ring Type |
|---|
| Standard |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| 6201 | 12mm | 32mm | 10mm | Steel | 1,250 | 550 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
| 6803 | 17mm | 26mm | 5mm | Steel | 170 | 90 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
| 6902 | 15mm | 28mm | 7mm | Steel | 970 | 500 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
| 6201-2RS | 12mm | 32mm | 10mm | Steel | 1,250 | 550 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
| 6803-2RS | 17mm | 26mm | 5mm | Steel | 380 | 190 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
| 6902-2RS | 15mm | 28mm | 7mm | Steel | 970 | 500 | 13,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Electrically Insulated Ball Bearings
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing. The ceramic balls generate less heat than steel balls, so they require lubrication less frequently. Shields keep out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
| 6207-2Z | 35 | 72 | 17 | Steel | 5,750 | 2,900 | 13,500 | Lubricated | -20° to 250° | ABEC-1 | 0000000 | 0000000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Crowned Rollers without Seal | |||||||||||||||
| 22 | 12 | 10 | 23 | M10 | 1.25 | 13 | 15 | 0.6 | 13,500 | 1,300 | 1,100 | 250° | Needle Roller | 00000000 | 0000000 |