Clear All
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Inner Ring Type Inner Ring Type |
|---|
| Standard |
Shaft Mount Type Shaft Mount Type |
|---|
|
Lubrication Lubrication |
|---|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
Radial Clearance Trade Number Radial ClearanceTrade Number |
|---|
|
Cage Material Cage Material |
|---|
|
Construction Construction |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
ABEC Rating ABEC Rating |
|---|
|
Ball Material Ball Material |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Sealed
Sealed
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
| 6201-2RS | 12mm | 32mm | 10mm | Steel | 1,550 | 690 | 14,600 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
| 11/16" | 7/8" | 3/4" | Steel | 2,950 | 5,150 | 14,600 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
Sealed—Both Sides | ||||||||||||
| 10mm | 14mm | 12mm | Steel | 700 | 750 | 14,600 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |