Bearing Trade Number Bearing Trade Number |
|---|
|
|
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Inner Ring Type Inner Ring Type |
|---|
 | Standard |
Shaft Mount Type Shaft Mount Type |
|---|
|
Lubrication Lubrication |
|---|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Cage Material Cage Material |
|---|
|
Construction Construction |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6901 | 12mm | 24mm | 6mm | Steel | 640 | 330 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 000000 |
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
| R4-2Z | 1/4" | 5/8" | 0.196" | Steel | 320 | 135 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
| 6901-2Z | 12mm | 24mm | 6mm | Steel | 640 | 330 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
| 16003-2Z | 17mm | 35mm | 8mm | Steel | 1,400 | 730 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R4-2RS | 1/4" | 5/8" | 0.196" | Steel | 320 | 135 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | 000000000 | 00000 |
| 6901-2RS | 12mm | 24mm | 6mm | Steel | 640 | 330 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 0000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| 605H | 5 | 14 | 5 | 440C Stainless Steel | 230 | 110 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
| 686H | 6 | 19 | 3.5 | 440C Stainless Steel | 180 | 90 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
| 605H-2RS | 5 | 14 | 5 | 440C Stainless Steel | 230 | 110 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
| 686H-2RS | 6 | 13 | 5 | 440C Stainless Steel | 180 | 90 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
| 7mm | 19mm | 6mm | 440C Stainless Steel | 300 | 90 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
| 9mm | 17mm | 4mm | 440C Stainless Steel | 235 | 80 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
Shielded | |||||||||||
| 7mm | 19mm | 6mm | 440C Stainless Steel | 300 | 90 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
| 9mm | 17mm | 6mm | 440C Stainless Steel | 235 | 80 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
440 stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
| 12mm | 24mm | 6mm | 640 | 320 | Not Rated | Not Rated | Not Rated | Not Rated | 31,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
440 Stainless Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
| 12mm | 24mm | 6mm | 640 | 320 | Not Rated | Not Rated | Not Rated | Not Rated | 31,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
Flanged Ultra-Thin Ball Bearings
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter, mm | For Housing ID, mm | Width, mm | OD, mm | Thickness, mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
| 15 | 24 | 5 | 26 | 1.1 | 460 | 280 | 31,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 000000 |
| 15 | 24 | 7 | 26 | 1.5 | 460 | 280 | 31,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
Shielded | ||||||||||||
| 10 | 22 | 6 | 25 | 1.5 | 600 | 260 | 31,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
440C Stainless Steel Ring | ||||||||||||
Open | ||||||||||||
| 15 | 24 | 5 | 26 | 1.1 | 370 | 225 | 31,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
Shielded | ||||||||||||
| 10 | 22 | 6 | 25 | 1.5 | 480 | 215 | 31,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
| 7mm | 11mm | 9mm | Steel | 700 | 660 | 31,000 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
Low-Profile Mounted Ball Bearings
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded Steel Bearings with Aluminum Housing | ||||||||||||||
Shaft Mount Type: Press Fit | ||||||||||||||
| 3/8" | 9/16" | 1 1/8" | 2 1/4" | 13/32" | 13/64" | 1 3/4" | 630 | 250 | 31,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 000000 |