Bearing Type Bearing Type |
|---|
 | Ball |
Bearing Trade Number Bearing Trade Number |
|---|
For Load Direction For Load Direction |
|---|
 | Radial |
Ring Material Ring Material |
|---|
|
Construction Construction |
|---|
|
Inner Ring Type Inner Ring Type |
|---|
 | Standard |
Ball Material Ball Material |
|---|
|
Lubricant Lubricant |
|---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
For Shaft Type For Shaft Type |
|---|
 | Round |
Lubrication Lubrication |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6800 | 10mm | 19mm | 5mm | Steel | 380 | 180 | 37,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6800-2Z | 10mm | 19mm | 5mm | Steel | 380 | 180 | 37,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 6800-2RS | 10mm | 19mm | 5mm | Steel | 380 | 180 | 37,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 00000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| 604 | 4 | 12 | 4 | 440C Stainless Steel | 240 | 75 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
| 633 | 3 | 13 | 5 | 440C Stainless Steel | 220 | 100 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
| 685 | 5 | 11 | 3 | 440C Stainless Steel | 120 | 80 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
| 604-2RS | 4 | 12 | 4 | 440C Stainless Steel | 240 | 75 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
| 633-2RS | 3 | 13 | 5 | 440C Stainless Steel | 220 | 100 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
| 685-2RS | 5 | 11 | 5 | 440C Stainless Steel | 120 | 80 | 37,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 689-2Z | 9mm | 17mm | 5mm | 19mm | 1.1mm | 440C Stainless Steel | 230 | 120 | 37,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
| 698-2Z | 8mm | 19mm | 6mm | 22mm | 1.5mm | 440C Stainless Steel | 400 | 160 | 37,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
| 698-2Z | 8mm | 19mm | 6mm | 22mm | 1.5mm | Steel | 500 | 200 | 37,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Flanged Ultra-Thin Ball Bearings
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter, mm | For Housing ID, mm | Width, mm | OD, mm | Thickness, mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
| 10 | 22 | 6 | 25 | 1.5 | 600 | 260 | 37,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 000000 |
Self-Aligning Flanged Ball Bearings
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Stainless steel bearings are more corrosion resistant than steel bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 385 | 180 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 000000 |
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 385 | 180 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Shielded | |||||||||||||
Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 380 | 180 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 3/8" | 15/16" | 3/8" | 1" | 0.03" | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
440 stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
| 10mm | 19mm | 5mm | 380 | 185 | Not Rated | Not Rated | Not Rated | Not Rated | 37,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
| 10mm | 19mm | 7mm | 380 | 185 | Not Rated | Not Rated | Not Rated | Not Rated | 37,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 0000 |
440 Stainless Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
| 10mm | 19mm | 5mm | 380 | 185 | Not Rated | Not Rated | Not Rated | Not Rated | 37,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
| 10mm | 19mm | 7mm | 380 | 185 | Not Rated | Not Rated | Not Rated | Not Rated | 37,000 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |