Mounted Bearing Type Mounted Bearing Type |
---|
![]() | Base Mount |
![]() | Two-Bolt Flange Mount |
![]() | Four-Bolt Flange Mount |
Shaft Mount Type Shaft Mount Type |
---|
|
Housing Material Housing Material |
---|
|
For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
![]() | Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
|
|
Maximum Speed Maximum Speed | Show |
---|
|
Maximum Speed Maximum Speed | Hide |
---|
Bearing Material Bearing Material |
---|
|
Grease Fitting Included Grease Fitting Included |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6312-2Z | 60mm | 130mm | 31mm | Steel | 18,400 | 10,800 | 5,300 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 000000 |
Self-Aligning Ball Bearings

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2212 | 60 | 110 | 28 | Steel | 7,600 | 2,800 | 5,300 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 0000000 |
Ultra-Thin Ball Bearings

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
90mm | 115mm | 13mm | 4,250 | 4,400 | Not Rated | Not Rated | Not Rated | Not Rated | 5,300 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 0000000 |
Thrust Ball Bearings


Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Cage Material | Washer Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Open | ||||||||||||
25mm | 47mm | 15mm | Nylon Plastic | Steel | 6,200 | 11,300 | 5,300 | Required | -40° to 250° | Two Washers | 00000000 | 000000 |
Tapered-Roller Bearings


Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
35mm | 72mm | 15mm | 30207 | 9,400 | 12,550 | 5,950 | Not Rated | 5,300 | Required | -50° to 300° | 0000000 | 000000 |
40mm | 68mm | 14.5mm | 32008 | 10,550 | 15,100 | 6,650 | Not Rated | 5,300 | Required | -50° to 300° | 0000000 | 00000 |
Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.
For technical drawings and 3-D models, click on a part number.
Combination Ball/Needle-Roller Bearings


A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ball Bearing OD, mm | Ball Bearing Wd., mm | Ring Material | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Open | |||||||||||||||
35 | 47 | 30 | 53 | 12 | Steel | 4,950 | 9,150 | 4,500 | 8,450 | 5,300 | Required | 8 | -20° to 230° | 00000000 | 0000000 |
Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
50mm | 58mm | 25mm | Steel | 8,650 | 18,850 | 5,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 000000 |
Mounted Ball Bearings
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with eccentric lock have a collar that you twist in one direction to grip and the other to release. Compared to bearings with a set screw, they’re easier to install, require less adjustment over time, and are better for high-speed applications. But, they only work on shafts that spin in one direction.
Bearing with concentric lock use adapter sleeves (sold separately) to lock onto shafts in a way that enables high running speeds with little vibration. They work for applications that require reversing because they allow shafts to rotate in both directions.
For technical drawings and 3-D models, click on a part number.


Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | |||||||||||||||
Shaft Mount Type: Eccentric Lock | |||||||||||||||
1 1/4" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
1 3/8" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 7/16" | 1 13/16" | 3 5/8" | 6 9/16" | 2 1/16" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Shaft Mount Type: Concentric Lock | |||||||||||||||
30mm | 47.6mm | 93mm | 167mm | 47.3mm | 24mm | 17mm | 129mm | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |

For Shaft Diameter, mm | ID, mm | Width, mm | Includes | Each | |
1137 Carbon Steel Sleeves | |||||
---|---|---|---|---|---|
30 | 30 | 43 | Lock Nut, Lock Washer | 00000000 | 000000 |
High-Speed Mounted Ball Bearings


These bearings have the highest speed ratings of any mounted ball bearing that we offer. The clamp-on collar creates a 360° grip around the shaft for a strong, mar-free hold. Bearings are self-aligning to compensate for shaft misalignment.
Bearings with torque indicator tell you when the shaft is centered, ensuring smooth rotation in applications with high vibration.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing—Shaft Mount Type: Clamp On | |||||||||||||||
Without Torque Indicator | |||||||||||||||
1 3/4" | 2 1/8" | 4 5/8" | 7 1/2" | 2 5/16" | 13/16" | 9/16" | 5 3/4" | 7,900 | 5,100 | 5,300 | -20° to 200° | Self Aligning | Lubricated | 0000000 | 0000000 |
Shielded Steel Bearings with Cast Iron Housing—Shaft Mount Type: Clamp On | |||||||||||||||
With Torque Indicator | |||||||||||||||
1 7/16" | 1 7/8" | 3 11/16" | 6 9/16" | 1 55/64" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Mounted Ball Bearings with Two-Bolt Flange

Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with a set-screw shaft mount secure to shafts with no need for an additional collar. They can be used for bi-directional shaft rotation when applications require reversing action. The set screw may cause some marring on the shaft.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||
1 1/4" | 3 5/8" | 6 1/8" | 1 53/64" | 9/16" | 9/16" | 5 1/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
1 7/16" | 3 5/8" | 6 1/8" | 1 53/64" | 9/16" | 9/16" | 5 1/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Mounted Ball Bearings with Four-Bolt Flange
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw leaves some marring on shafts. Use them in applications where shafts rotate in both directions.
Eccentric lock bearings are quick to install—twist them in one direction to tighten and the opposite to loosen. They’re better than set screw bearings for high speed applications, but they only work with shafts that rotate in one direction.
For technical drawings and 3-D models, click on a part number.


Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||
1 1/4" | 4 5/8" | 4 5/8" | 1 53/64" | 1/2" | 9/16" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
1 3/8" | 4 5/8" | 4 5/8" | 1 29/32" | 1/2" | 9/16" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
1 7/16" | 4 5/8" | 4 5/8" | 1 53/64" | 1/2" | 9/16" | 3 5/8" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Shaft Mount Type: Eccentric Lock | ||||||||||||||
35mm | 118mm | 118mm | 50.4mm | 13mm | 14mm | 92mm | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Shaft-Mount V-Groove Track Rollers


Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||
13/16" | 5/16" | 3/16" | 5/16" | 3/16" | 1/16" | 5,300 | 270 | 270 | 50 | 210° | Ball | __ | 0000000 | 000000 |
Steel V-Groove Rollers without Seal | ||||||||||||||
13/16" | 5/16" | 3/16" | 5/16" | 3/16" | 1/16" | 5,300 | 270 | 270 | 50 | 245° | Ball | Shielded | 0000000 | 00000 |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||
13/16" | 5/16" | 3/16" | 5/16" | 3/16" | 1/16" | 5,300 | 270 | 270 | 50 | 210° | Ball | __ | 0000000 | 00000 |
Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
440C stainless steel rollers offer better corrosion resistance than steel rollers.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.

Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Includes | Each | |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||||||||
20 | 8 | 6 | 15 | M6 | 1 | 9 | 2.1 | 12 | 4 | 2 | 5,300 | 270 | 270 | 50 | 210° | Ball | __ | Mounting Hardware | 0000000 | 000000 |
440C Stainless Steel V-Groove Rollers without Seal | ||||||||||||||||||||
20 | 8 | 6 | 15 | M6 | 1 | 9 | 2.1 | 12 | 4 | 2 | 5,300 | 270 | 270 | 50 | 245° | Ball | Shielded | Mounting Hardware | 0000000 | 00000 |
Steel V-Groove Rollers without Seal | ||||||||||||||||||||
20 | 8 | 8 | 8 | M8 | 1.25 | 8 | 3.3 | 11.11 | 4 | 2 | 5,300 | 120 | 120 | 20 | 245° | Ball | Shielded | __ | 0000000 | 00000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
440C stainless steel rollers offer better corrosion resistance than steel rollers.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.

Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Features | Includes | Each | |
440C Stainless Steel V-Groove Rollers with Seal | |||||||||||||||||||
20 | 8 | 6 | 15 | M6 | 1 | 9 | 2.1 | 12 | 4 | 2 | 5,300 | 220 | 220 | 40 | 500° | __ | Mounting Hardware | 0000000 | 000000 |
440C Stainless Steel V-Groove Rollers without Seal | |||||||||||||||||||
20 | 8 | 6 | 8 | M6 | 1 | 6 | 3.3 | 11.11 | 4 | 2 | 5,300 | 270 | 270 | 50 | 245° | Shielded | __ | 0000000 | 00000 |