With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction. Use them in applications where precision movement is required, such as pick-and-place and automated indexing conveyor systems. Shields keep out dust and contaminants.

Shielded bearings dissipate heat better than sealed bearings, but don’t keep out as much dust.

For technical drawings and 3-D models, click on a part number.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

For technical drawings and 3-D models, click on a part number.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.

Double-row bearings handle thrust loads in both directions.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

These bearings have angular raceways for combined thrust and radial loads—install them where precision tolerances are required for accuracy and high speeds. They’re often used in spindle applications. To handle thrust loads in both directions, they have a double-row construction. Pair them with cylindrical roller bearings to better handle radial loads. They have an open construction to dissipate heat efficiently.

For technical drawings and 3-D models, click on a part number.

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.

For technical drawings and 3-D models, click on a part number.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.

For technical drawings and 3-D models, click on a part number.

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling. A cage prevents the rollers from touching each other, reducing friction for high-speed use. All of these bearings have an inner ring that's flanged on one side, so they only allow heat expansion in one direction. The bearings can be taken apart, so you can install them with precision and quickly dismantle them for maintenance or replacement.

For technical drawings and 3-D models, click on a part number.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.

Washers allow you to use the bearing on unhardened and unground surfaces.

For technical drawings and 3-D models, click on a part number.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.