Bearing Type Bearing Type |
|---|
 | Ball |
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
Ring Material Ring Material |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Shaft Mount Type Shaft Mount Type |
|---|
|
Lubrication Lubrication |
|---|
|
Maximum Speed Maximum Speed | Show |
|---|
|
Maximum Speed Maximum Speed | Hide |
|---|
Ball Material Ball Material |
|---|
|
Cage Material Cage Material |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Construction Construction |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2RS | 1/8" | 3/8" | 5/32" | Steel | 140 | 25 | 56,000 | Lubricated | -20° to 230° | ABEC-1 | 000000000 | 00000 |
Stainless Steel Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R168 | 1/4" | 3/8" | 1/8" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2Z | 1/8" | 3/8" | 5/32" | 440C Stainless Steel | 110 | 25 | 56,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 00000 |
| R168-2Z | 1/4" | 3/8" | 1/8" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 0000 |
| 104-2Z | 4mm | 10mm | 4mm | 440C Stainless Steel | 130 | 40 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 000000 | 0000 |
| 623-2Z | 3mm | 10mm | 4mm | 440C Stainless Steel | 140 | 45 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
Inner Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R168-2Z | 1/4" | 3/8" | 1/8" | 0.279" | 0.156" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2RS | 1/8" | 3/8" | 5/32" | 440C Stainless Steel | 110 | 25 | 56,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| R166 | 3/16" | 3/8" | 1/8" | 440C Stainless Steel | 100 | 25 | 56,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 000000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R168 | 1/4" | 3/8" | 1/8" | 0.422" | 0.02" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| 605H | 5mm | 14mm | 5mm | 16mm | 1mm | 440C Stainless Steel | 230 | 90 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
| 686H | 6mm | 13mm | 3.5mm | 15mm | 1mm | 440C Stainless Steel | 190 | 75 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
| 605 | 5mm | 14mm | 5mm | 16mm | 1mm | Steel | 290 | 110 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 0000 |
| 686 | 6mm | 13mm | 3.5mm | 15mm | 1mm | Steel | 240 | 95 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 0000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R168-2Z | 1/4" | 3/8" | 1/8" | 0.422" | 0.04" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| 104-2Z | 4mm | 10mm | 4mm | 11.6mm | 0.8mm | 440C Stainless Steel | 130 | 40 | 56,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 0000 |
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R168-2Z | 1/4" | 3/8" | 1/8" | 0.422" | 0.04" | 0.279" | 0.156" | 440C Stainless Steel | 80 | 30 | 56,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
Precision Flanged Ball Bearings
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||||
| R166 | 3/16" | 3/8" | 1/8" | 0.422" | 0.02" | 440C Stainless Steel | 100 | 25 | 56,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 000000 |
Angular-Contact Thrust Ball Bearings
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Open | |||||||||||||
| 7002 | 15 | 32 | 9 | Steel | 1,150 | 530 | 56,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 0000000 |