Bearing Trade Number Bearing Trade Number |
---|

For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
![]() | Thrust |
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
For Shaft Width For Shaft Width |
---|
|
Cage Material Cage Material |
---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
Maximum Speed Maximum Speed | Show |
---|
|
Maximum Speed Maximum Speed | Hide |
---|
|
Lubrication Lubrication |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6212-2Z | 60mm | 110mm | 22mm | Steel | 11,600 | 8,200 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
6310-2Z | 50mm | 110mm | 27mm | Steel | 13,900 | 8,100 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6306-2RS | 30mm | 72mm | 19mm | Steel | 6,500 | 3,600 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
6310-2RS | 50mm | 110mm | 27mm | Steel | 13,900 | 8,100 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
R20 | 1 1/4" | 2 1/4" | 3/8" | Steel | 2,250 | 1,650 | 6,000 | Lubricated | 10° to 200° | ABEC-1 | 0000000 | 000000 |
6007 | 35mm | 62mm | 14mm | Steel | 2,750 | 2,000 | 6,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
R20-2RS | 1 1/4" | 2 1/4" | 1/2" | Steel | 2,250 | 1,650 | 6,000 | Lubricated | 10° to 200° | ABEC-1 | 0000000 | 00000 |
6007-2RS | 35mm | 62mm | 14mm | Steel | 2,750 | 2,000 | 6,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6307-2RS | 35 | 80 | 21 | Steel | 7,850 | 4,250 | 6,000 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 000000 |
Hex-Bore Ball Bearings


Mount these bearings onto a hex shaft. All have an extended inner ring for additional shaft support. Seals keep out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Wd. | Hex Wd. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
204 | 11/16" | 0.695" | 1.8504" | 0.551" | 1.166" | 0.827" | Steel | 2,850 | 1,500 | 6,000 | Not Required | -40° to 250° | ABEC-1 | 000000 | 000000 |
Self-Aligning Ball Bearings

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2211 | 55 | 100 | 25 | Steel | 6,000 | 2,200 | 6,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 0000000 |
One-Way Locking Ball Bearing Clutches

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction. Use them in applications where precision movement is required, such as pick-and-place and automated indexing conveyor systems. Shields keep out dust and contaminants.
For dirty or dusty environments, sealed bearings are the best choice, since they block out contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||
FZ 6204 2RS | 20 | 47 | 19 | Steel | 1,540 | 940 | 6,000 | 64 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 0000000 |
Tapered Bore Self-Aligning Ball Bearings


For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static, lbs. | Maximum Speed, rpm | Lubrication | Misalignment Capability | Maximum Temperature, °F | Rate of Taper | ABEC Rating | Each | |
Open | ||||||||||||||
2211K | 55 | 100 | 25 | Steel | 6,000 | 2,200 | 6,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 0000000 |
Permanently Lubricated Stainless Steel Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6007 | 35 | 62 | 14 | 440C Stainless Steel | 2,750 | 2,000 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
6206 | 30 | 62 | 16 | 440C Stainless Steel | 3,350 | 2,300 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6808 | 40 | 52 | 7 | 440C Stainless Steel | 1,100 | 930 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
6007-2RS | 35 | 62 | 14 | 440C Stainless Steel | 2,750 | 2,000 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6206-2RS | 30 | 62 | 16 | 440C Stainless Steel | 3,350 | 2,300 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6708-2RS | 40 | 50 | 6 | 440C Stainless Steel | 560 | 500 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
6808-2RS | 40 | 52 | 7 | 440C Stainless Steel | 1,100 | 930 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6809-2RS | 45 | 58 | 7 | 440C Stainless Steel | 1,350 | 1,200 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
6907-2RS | 35 | 55 | 10 | 440C Stainless Steel | 2,450 | 1,750 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6908-2RS | 40 | 62 | 12 | 440C Stainless Steel | 3,050 | 2,200 | 6,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
6007-2RS | 35 | 62 | 14 | 440C Stainless Steel | 3,050 | 1,850 | 6,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
6206-2RS | 30 | 62 | 16 | 440C Stainless Steel | 3,700 | 2,000 | 6,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
6809-2RS | 45 | 58 | 7 | 440C Stainless Steel | 1,150 | 960 | 6,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
6907-2RS | 35 | 55 | 10 | 440C Stainless Steel | 2,050 | 1,350 | 6,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Angular-Contact Thrust Ball Bearings

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Sealed | ||||||||||||||
7306-2RS | 30 | 72 | 19 | Steel | 7,650 | 4,950 | 6,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 0000000 |
Ultra-Thin Ball Bearings

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
440 stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
35mm | 44mm | 5mm | 410 | 360 | Not Rated | Not Rated | Not Rated | Not Rated | 6,000 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 000000 |
440 Stainless Steel Ring | ||||||||||||||
Open | ||||||||||||||
35mm | 44mm | 5mm | 410 | 360 | Not Rated | Not Rated | Not Rated | Not Rated | 6,000 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 00000 |
One-Piece Thrust Ball Bearings

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Features | Each | |
Shielded | |||||||||||
5/8" | 1 11/32" | 9/16" | Steel | 4,100 | 6,700 | 6,000 | Required | -40° to 250° | Lubrication Hole | 00000000 | 000000 |
Tapered-Roller Bearings


Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
35mm | 62mm | 14mm | 32007 | 9,400 | 12,550 | 7,400 | Not Rated | 6,000 | Required | -50° to 300° | 0000000 | 000000 |
Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.
For technical drawings and 3-D models, click on a part number.
Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
1 5/8" | 2" | 1 1/4" | Steel | 11,400 | 21,800 | 6,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 000000 |
Needle-Roller Thrust Bearings
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
Washers allow you to use the bearing on unhardened and unground surfaces.
For technical drawings and 3-D models, click on a part number.

Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | |
Steel Rollers | |||||||||||
Open | |||||||||||
1 1/4" | 1 15/16" | 5/64" | 4,500 | 20,500 | 6,000 | Required | 0.2 | 0° to 240° | __ | 0000000 | 00000 |
40mm | 60mm | 3mm | 6,300 | 25,500 | 6,000 | Required | 0.2 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
Threaded Track Rollers

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.

Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||||||
3/4" | 1/2" | 3/8" | 7/8" | 3/8"-24 | 3/8" | 39/64" | 1/32" | 6,000 | 2,000 | 1,600 | 250° | Needle Roller | 0000000 | 000000 |
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 39/64" | 1/32" | 6,000 | 4,100 | 1,600 | 250° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||||||
3/4" | 1/2" | 3/8" | 7/8" | 3/8"-24 | 3/8" | 39/64" | 1/32" | 6,000 | 2,000 | 1,600 | 250° | Needle Roller | 0000000 | 00000 |
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 39/64" | 1/32" | 6,000 | 4,100 | 1,600 | 250° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||||||
3/4" | 1/2" | 3/8" | 7/8" | 3/8"-24 | 3/8" | 39/64" | 1/32" | 6,000 | 2,000 | 1,600 | 250° | Needle Roller | 0000000 | 00000 |
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 39/64" | 1/32" | 6,000 | 4,100 | 1,600 | 250° | Needle Roller | 0000000 | 00000 |
High-Load Threaded Track Rollers


With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel | |||||||||||||||
Flat Rollers with Seal | |||||||||||||||
1 1/2" | 7/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/32" | 6,000 | 7,000 | 6,200 | 250° | Cylindrical Roller | Mounting Hardware | 0000000 | 000000 |
Thrust-Load-Rated Threaded Track Rollers


These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
1" | 3/4" | 7/16" | 1" | 7/16"-20 | 1/2" | 1/2" | 1/32" | 6,000 | 380 | 350 | 240 | 325° | Ball | Mounting Hardware | 0000000 | 0000000 |
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 6,000 | 1,100 | 900 | 470 | 325° | Ball | Mounting Hardware | 0000000 | 000000 |
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 6,000 | 1,100 | 1,000 | 470 | 225° | Ball | Mounting Hardware | 0000000 | 00000 |
1 3/4" | 1 1/8" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 6,000 | 1,100 | 1,000 | 470 | 225° | Ball | Mounting Hardware | 0000000 | 00000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,600 | 1,400 | 910 | 225° | Ball | Mounting Hardware | 0000000 | 00000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,700 | 1,300 | 910 | 325° | Ball | Mounting Hardware | 0000000 | 000000 |
2 1/4" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,600 | 1,400 | 910 | 225° | Ball | Mounting Hardware | 0000000 | 00000 |
2 1/2" | 1 5/8" | 1" | 2 1/4" | 1"-14 | 1 1/2" | 1 1/4" | 1/16" | 6,000 | 1,700 | 1,300 | 910 | 325° | Ball | Mounting Hardware | 0000000 | 000000 |
Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers


These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
440C stainless steel rollers are harder and more wear resistant than 303 stainless steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., ° F | Bearing Type | Includes | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Hex Stud End Drive | ||||||||||||||||
1" | 3/4" | 7/16" | 1" | 7/16"-20 | 1/2" | 1/2" | 1/32" | 6,000 | 190 | 190 | 240 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |
1 1/4" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 5/8" | 1/32" | 6,000 | 350 | 350 | 320 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 6,000 | 550 | 550 | 690 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,500 | 1,300 | 1,000 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
Corrosion-Resistant Threaded Track Rollers


Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
440C stainless steel rollers offer better corrosion resistance than chrome-plated steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||
3/4" | 1/2" | 3/8" | 7/8" | 3/8"-24 | 3/8" | 1/2" | 1/32" | 6,000 | 1,500 | 1,400 | 250° | Needle Roller | 0000000 | 000000 |
Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.

Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Black-Oxide Steel Flat Rollers without Seal | ||||||||||
3/4" | 1/2" | 1/4" | 9/16" | 6,000 | 4,100 | 1,600 | 220° | Needle Roller | 0000000 | 000000 |
Black-Oxide Steel Flat Rollers with Seal | ||||||||||
3/4" | 1/2" | 1/4" | 9/16" | 6,000 | 4,100 | 1,600 | 220° | Needle Roller | 0000000 | 00000 |
Black-Oxide Steel Crowned Rollers with Seal | ||||||||||
3/4" | 1/2" | 1/4" | 9/16" | 6,000 | 4,100 | 1,600 | 220° | Needle Roller | 0000000 | 00000 |
High-Load Shaft-Mount Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.


Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||
1 1/2" | 7/8" | 7/16" | 15/16" | 6,000 | 7,000 | 6,200 | 250° | Cylindrical Roller | 000000 | 000000 |
Corrosion-Resistant Shaft-Mount Track Rollers


Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring. Rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||
3/4" | 1/2" | 1/4" | 9/16" | 6,000 | 2,100 | 1,400 | 250° | Needle Roller | 0000000 | 000000 |
High-Speed Shaft-Mount Track Rollers


The outer ring is built to handle higher speeds than standard shaft-mount track rollers. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers without Seal | ||||||||||
1 3/4" | 3/4" | 7/8" | 3/4" | 6,000 | 6,000 | 4,200 | 250° | Needle Roller | 0000000 | 000000 |
Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.

Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
2" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 5/8" | 1/32" | 5/8" | 5/16" | 6,000 | 600 | 500 | 370 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |
2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 680 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.

Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||
2" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 13/16" | 1/32" | 5/8" | 5/16" | 6,000 | 600 | 500 | 370 | 225° | Mounting Hardware | 0000000 | 0000000 |
2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 57/64" | 1 3/8" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 470 | 225° | Mounting Hardware | 0000000 | 000000 |
Flanged Threaded Track Rollers


Thread the stud directly into a component or secure with a nut for through-hole mounting. The flange provides guidance and helps the roller stay on track. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
Stainless steel rollers offer increased corrosion resistance over steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Flange | Static Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | OD | Thick. | Max. Speed, rpm | Radial | Thrust | Max. Temp., °F | Includes | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Ball Bearing | ||||||||||||||||
1" | 3/4" | 7/16" | 1" | 7/16"-20 | 1/2" | 1/2" | 1/32" | 1 3/8" | 7/32" | 6,000 | 150 | 150 | 225° | Mounting Hardware | 0000000 | 0000000 |
1 1/4" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 5/8" | 1/32" | 1 9/16" | 7/32" | 6,000 | 280 | 230 | 225° | Mounting Hardware | 0000000 | 000000 |
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 2 3/16" | 11/32" | 6,000 | 440 | 350 | 225° | Mounting Hardware | 0000000 | 000000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 2 11/16" | 19/32" | 6,000 | 1,000 | 740 | 225° | Mounting Hardware | 0000000 | 000000 |
2 1/2" | 1 5/8" | 1" | 2 1/4" | 1"-14 | 1 1/2" | 1 1/4" | 1/16" | 3 3/16" | 19/32" | 6,000 | 1,000 | 740 | 225° | Mounting Hardware | 0000000 | 000000 |
Steel Flat Rollers with Seal | ||||||||||||||||
Ball Bearing | ||||||||||||||||
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 2 3/16" | 11/32" | 6,000 | 1,100 | 470 | 225° | Mounting Hardware | 0000000 | 00000 |
1 3/4" | 1 1/8" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 2 7/16" | 11/32" | 6,000 | 1,100 | 470 | 225° | Mounting Hardware | 0000000 | 00000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 2 11/16" | 19/32" | 6,000 | 1,600 | 910 | 225° | Mounting Hardware | 0000000 | 00000 |
2 1/4" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 2 15/16" | 19/32" | 6,000 | 1,600 | 910 | 225° | Mounting Hardware | 0000000 | 00000 |
Double-Flanged Track Rollers


A dual-flange design provides guidance on both sides and helps these rollers stay on track. They handle both radial and thrust (top and side) loads. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Flange | Groove | Static Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | OD | Thick. | Wd. | Dp. | Max. Speed, rpm | Radial | Thrust | Max. Temp., ° F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||||
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 2 3/16" | 9/32" | 9/16" | 11/16" | 6,000 | 1,100 | 470 | 225° | Ball | 000000 | 0000000 |
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 2 11/16" | 17/32" | 9/16" | 11/16" | 6,000 | 1,600 | 910 | 225° | Ball | 000000 | 000000 |