For Shaft Diameter For Shaft Diameter |
---|
|
|
|
Mounted Bearing Type Mounted Bearing Type |
---|
![]() | Base Mount |
Housing Material Housing Material |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Length Length |
---|

Shaft Mount Type Shaft Mount Type |
---|
|
ID ID |
---|
Environment Environment |
---|
|
Seal Type Seal Type |
---|
|
Bearing Material Bearing Material |
---|
|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
---|
Center Height Center Height |
---|

|
|
For Load Direction For Load Direction |
---|
![]() | Radial |
Overall Width Overall Width |
---|

|
|
Overall Height Overall Height |
---|

|
|
|
Grease Fitting Included Grease Fitting Included |
---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
|
|
Alignment Style Alignment Style |
---|
|
Number of Mounting Holes Number of Mounting Holes |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Ball and Roller Bearings
More
Washdown Mounted Ball Bearings
Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants. All have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
316 stainless steel bearings resist corrosion and prevent rusting caused by salt water, chlorine solutions, and chemicals. Snap optional covers onto bearings to shield them from moisture. Made of polypropylene, they resist corrosion, won’t absorb water, and are FDA compliant.
Polymer-coated cast iron bearings are also known as tapped-base mounted ball bearings. They require access to the underside of the mounting surface.
Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw does leave some marring on shafts.
Clamp on bearings have a locking collar to center shafts and secure them better than set screw bearings, so there’s less vibration and noise. To install them, tighten the locking collar’s screw until it grips the inner ring.
Concentric lock bearings have a locking collar to center shafts and secure them better than set screw bearings, so there’s less vibration and noise. To install them, tighten the locking collar’s screw so it grips the inner ring.
For technical drawings and 3-D models, click on a part number.


Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dp. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Lubrication | Specifications Met | Each | |
Self Aligning | ||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||
3/4" | 1 5/16" | 2 9/16" | 5" | 3 9/32" | 0.5" | 3 3/4" | 2,600 | 1,400 | 3,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 0000000 |
1" | 1 7/16" | 2 13/16" | 5 1/2" | 3 15/32" | 0.5" | 4 1/8" | 2,800 | 1,650 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 3/16" | 1 11/16" | 3 3/8" | 6 1/2" | 3 19/32" | 0.563" | 4 3/4" | 4,350 | 2,550 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/4" | 1 11/16" | 3 3/8" | 6 1/2" | 3 19/32" | 0.563" | 4 3/4" | 4,350 | 2,550 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 3/8" | 1 7/8" | 3 3/4" | 6 9/16" | 3 27/32" | 0.625" | 4 3/4" | 5,750 | 3,450 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 7/16" | 1 7/8" | 3 3/4" | 6 9/16" | 3 27/32" | 0.625" | 4 3/4" | 5,750 | 3,450 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/2" | 1 15/16" | 3 15/16" | 7 1/4" | 4 7/32" | 0.688" | 5 3/8" | 7,300 | 4,450 | 1,750 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 11/16" | 2 1/8" | 4 1/4" | 7 1/2" | 4 1/4" | 0.688" | 5 3/4" | 7,900 | 5,100 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 3/4" | 2 1/8" | 4 1/4" | 7 1/2" | 4 1/4" | 0.688" | 5 3/4" | 7,900 | 5,100 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 15/16" | 2 1/4" | 4 9/16" | 8 1/8" | 4 5/32" | 0.75" | 6 1/4" | 7,850 | 5,200 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
2" | 2 1/4" | 4 9/16" | 8 1/8" | 4 5/32" | 0.75" | 6 1/4" | 7,850 | 5,200 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
2" | 2 1/2" | 5" | 8 5/8" | 4 21/32" | 0.75" | 6 3/4" | 9,750 | 6,600 | 1,250 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
2 7/16" | 2 3/4" | 5 9/16" | 9 1/2" | 5 5/32" | 0.875" | 7 1/4" | 11,750 | 8,150 | 1,250 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
25mm | 36.5mm | 72mm | 139.7mm | 88.2mm | 12.7mm | 104.8mm | 2,800 | 1,650 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
30mm | 42.9mm | 86mm | 165.1mm | 91.2mm | 14.3mm | 120.65mm | 4,350 | 2,550 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
35mm | 47.6mm | 95mm | 166.7mm | 97.6mm | 15.9mm | 127mm | 5,750 | 3,450 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
40mm | 49.2mm | 100mm | 184.2mm | 107.2mm | 17.5mm | 136.2mm | 7,300 | 4,450 | 1,750 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
Shaft Mount Type: Clamp On | ||||||||||||||
3/4" | 1 5/16" | 2 9/16" | 5" | 3 9/32" | 0.5" | 3 3/4" | 2,600 | 1,400 | 3,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1" | 1 7/16" | 2 13/16" | 5 1/2" | 3 15/32" | 0.5" | 4 1/8" | 2,800 | 1,650 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/4" | 1 11/16" | 3 3/8" | 6 1/2" | 3 19/32" | 0.563" | 4 3/4" | 4,350 | 2,550 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/2" | 1 15/16" | 3 15/16" | 7 1/4" | 4 7/32" | 0.688" | 5 3/8" | 7,300 | 4,450 | 1,750 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 15/16" | 2 1/4" | 4 9/16" | 8 1/8" | 4 5/32" | 0.75" | 6 1/4" | 7,850 | 5,200 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
2 3/8" | 2 3/4" | 5 9/16" | 9 1/2" | 5 5/32" | 0.875" | 7 1/4" | 11,750 | 8,150 | 1,250 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |


Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Thread Size | Hole Thread Type | Hole Dp. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Lubrication | Specifications Met | Each | |
Self Aligning | ||||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||||
3/4" | 1 5/16" | 2 9/16" | 3 1/8" | 1 1/2" | 3/8"-16 | UNC | 0.5" | 2" | 2,610 | 1,440 | 3,100 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 0000000 |
1" | 1 7/16" | 2 13/16" | 3" | 1 1/2" | 3/8"-16 | UNC | 0.5" | 2" | 2,800 | 1,650 | 2,700 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 3/16" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/4" | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/4" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 3/8" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 7/16" | 1 7/8" | 3 3/4" | 4 1/4" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/4" | 5,780 | 3,490 | 2,000 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 1/2" | 1 15/16" | 3 15/16" | 4 5/8" | 1 7/8" | 1/2"-13 | UNC | 0.75" | 3 1/2" | 7,340 | 4,460 | 1,750 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
1 15/16" | 2 1/4" | 4 5/8" | 5 1/2" | 2" | 5/8"-11 | UNC | 0.875" | 4" | 9,750 | 5,210 | 1,500 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |
Shaft Mount Type: Concentric Lock | ||||||||||||||||
30mm | 1 11/16" | 3 13/32" | 4" | 1 1/2" | 7/16"-14 | UNC | 0.625" | 3" | 4,380 | 2,560 | 2,300 | -20° to 220° | Lubricated | NSF Registered H1 | 0000000 | 000000 |


For Shaft Diameter | OD | Material | Mount Type | Temperature Range,°F | Specifications Met | Each | |
Closed | |||||||
---|---|---|---|---|---|---|---|
3/4", 20mm | 2 1/8", 54mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 000000 |
1", 25mm | 2 3/8", 60mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/8", 1 3/16", 1 1/4", 30mm | 2 11/16", 68mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/4", 1 3/8", 1 7/16", 35mm | 3 1/16", 78mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/2", 1.575", 40mm | 3 3/8", 86mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 11/16", 1 3/4", 45mm | 3 9/16", 90mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 15/16", 2", 50mm | 4", 102mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
2", 2 3/16" | 4 1/8", 105mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
2 3/8", 2 7/16", 60mm | 4 5/8", 117mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
Open | |||||||
3/4", 20mm | 2 1/8", 54mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1", 25mm | 2 3/8", 60mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/8", 1 3/16", 30mm | 68mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/4" | 2 11/16" | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 3/8", 1 7/16", 35mm | 3 1/16" | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 1/2", 1.575", 40mm | 3 3/8", 86mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 11/16" | 3 9/16" | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
1 15/16", 50mm | 4" | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
2", 2 3/16" | 4 1/8", 105mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
2 3/8", 2 7/16", 60mm | 4 11/16", 119mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |