For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
ID ID |
|---|
Material Material |
|---|
|
Plain Bearing Type Plain Bearing Type |
|---|
 | Thrust |
For Load Direction For Load Direction |
|---|
 | Thrust |
Environment Environment |
|---|
Bearing Type Bearing Type |
|---|
 | Plain |
Lubrication Lubrication |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
Lubricant Lubricant |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Lubrication Method Lubrication Method |
|---|
|
Specifications Met Specifications Met |
|---|
About Plain Bearings
More
Food Industry Oil-Embedded Thrust Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
841 Bronze Bearings
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 1/16" | 510 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
| 3/4" | 1/16" | 660 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
| 3/4" | 1/16" | 490 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 0000 |
| 1" | 1/16" | 930 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
| 1" | 1/16" | 950 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 0000 |
| 1" | 1/8" | 950 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 0000 |
| 1 3/4" | 1/8" | 3,550 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||
| 1 1/2" | 1/8" | 1,950 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 0000 |
| 2" | 1/8" | 3,750 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 000000 | 0000 |
For 6mm Shaft Dia. | |||||||
| 12mm | 1.5mm | 260 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 8mm Shaft Dia. | |||||||
| 16mm | 1.5mm | 460 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 10mm Shaft Dia. | |||||||
| 18mm | 2mm | 540 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 12mm Shaft Dia. | |||||||
| 24mm | 2mm | 880 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
| 24mm | 3mm | 880 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 14mm Shaft Dia. | |||||||
| 28mm | 2mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 15mm Shaft Dia. | |||||||
| 30mm | 2mm | 1,600 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 16mm Shaft Dia. | |||||||
| 32mm | 3mm | 1,850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 18mm Shaft Dia. | |||||||
| 36mm | 2mm | 2,350 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
For 20mm Shaft Dia. | |||||||
| 40mm | 2mm | 2,900 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
| 40mm | 3mm | 2,900 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 24mm Shaft Dia. | |||||||
| 48mm | 3mm | 3,500 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
| 48mm | 4mm | 3,500 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 25mm Shaft Dia. | |||||||
| 50mm | 3mm | 3,650 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 30mm Shaft Dia. | |||||||
| 60mm | 5mm | 6,550 lbs. @ 30 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
For 40mm Shaft Dia. | |||||||
| 60mm | 4mm | 4,850 lbs. @ 30 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
Made-to-Order 841 Bronze Bearings
To Order: For made-to-order bearings, please specify ID, OD, and thickness in 0.001" increments. The difference between the ID and OD must be at least 0.25".