System of Measurement System of Measurement |
|---|
|
Plain Bearing Type Plain Bearing Type |
|---|
 | Thrust |
Material Material |
|---|
|
Thickness Thickness |
|---|
|
For Load Direction For Load Direction |
|---|
 | Thrust |
Lubrication Lubrication |
|---|
|
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
|
Bearing Type Bearing Type |
|---|
 | Plain |
Backing Material Backing Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Shaft Type For Shaft Type |
|---|
 | Round |
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
About Plain Bearings
More
High-Load Dry-Running Thrust Bearings
A steel backing adds strength to these slippery PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Thick., mm | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Steel-Backed PTFE Plastic Bearings | |||||
|---|---|---|---|---|---|
For 10 mm Shaft Dia. | |||||
| 20 | 1.5 | 730 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
For 12 mm Shaft Dia. | |||||
| 24 | 1.5 | 880 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
For 18 mm Shaft Dia. | |||||
| 32 | 1.5 | 2,150 lbs. @ 60 rpm | -320° to 530° | 0000000 | 0000 |
For 20 mm Shaft Dia. | |||||
| 36 | 1.5 | 2,400 lbs. @ 60 rpm | -320° to 530° | 0000000 | 0000 |
For 26 mm Shaft Dia. | |||||
| 44 | 1.5 | 5,600 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 28 mm Shaft Dia. | |||||
| 48 | 1.5 | 6,200 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 32 mm Shaft Dia. | |||||
| 54 | 1.5 | 6,850 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 38 mm Shaft Dia. | |||||
| 62 | 1.5 | 7,600 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 42 mm Shaft Dia. | |||||
| 66 | 1.5 | 7,700 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |