Clear All
For Shaft Diameter For Shaft Diameter |
|---|
Plain Bearing Type Plain Bearing Type |
|---|
 | Thrust |
OD OD |
|---|
ID ID |
|---|
Material Material |
|---|
|
For Load Direction For Load Direction |
|---|
 | Thrust |
Lubrication Lubrication |
|---|
|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Lubrication Method Lubrication Method |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Lubricant Lubricant |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Plain Bearings
More
High-Load Oil-Embedded Thrust Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Iron-copper bearings support heavier loads than 863 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
863 Bronze Bearings
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 1/16" | 450 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
| 3/4" | 1/16" | 490 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 000 |
| 3/4" | 1/8" | 490 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
| 3/4" | 1/16" | 360 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 000 |
| 7/8" | 3/16" | 510 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1" | 1/16" | 650 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 3/32" | 650 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1" | 1/8" | 650 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 9/16" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/8" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
| 1" | 1/16" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1" | 1/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1 3/16" | 1/16" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 3/32" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 1/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/16" | 1,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1 1/4" | 1/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1 3/8" | 1/8" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 9/16" | 3/32" | 2,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/4" | 1/8" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 1,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 1,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 2,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 3/16" | 2,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2 7/8" | 1/8" | 4,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||||
| 2" | 1/16" | 4,250 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 4,250 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/2" Shaft Dia. | |||||||
| 2 1/2" | 1/8" | 5,600 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 3 1/2" | 3/16" | 10,000 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||
| 2 7/16" | 1/8" | 4,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2 5/8" | 1/8" | 5,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 2" Shaft Dia. | |||||||
| 3" | 1/8" | 5,800 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 6mm Shaft Dia. | |||||||
| 12mm | 1.5mm | 310 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 8mm Shaft Dia. | |||||||
| 16mm | 1.5mm | 410 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 10mm Shaft Dia. | |||||||
| 18mm | 1.5mm | 420 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 18mm | 2mm | 420 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 12mm Shaft Dia. | |||||||
| 24mm | 2mm | 620 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 24mm | 3mm | 620 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 14mm Shaft Dia. | |||||||
| 28mm | 2mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 15mm Shaft Dia. | |||||||
| 30mm | 2mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 30mm | 3mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 16mm Shaft Dia. | |||||||
| 32mm | 2mm | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 32mm | 3mm | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 18mm Shaft Dia. | |||||||
| 36mm | 2mm | 1,850 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 36mm | 3mm | 1,850 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 20mm Shaft Dia. | |||||||
| 40mm | 2mm | 2,050 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 40mm | 3mm | 2,050 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 24mm Shaft Dia. | |||||||
| 48mm | 3mm | 2,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 48mm | 4mm | 2,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 25mm Shaft Dia. | |||||||
| 50mm | 3mm | 2,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 50mm | 4mm | 2,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 30mm Shaft Dia. | |||||||
| 60mm | 4mm | 6,200 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 60mm | 5mm | 6,200 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
For 40mm Shaft Dia. | |||||||
| 60mm | 4mm | 4,550 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Iron-Copper Bearings
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 1/16" | 980 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
| 3/4" | 1/16" | 1,050 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 3/4" | 1/8" | 1,050 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
| 3/4" | 1/16" | 780 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 1/16" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 3/32" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1" | 1/8" | 1,400 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 9/16" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
| 1 1/4" | 1/8" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
| 1" | 1/16" | 2,250 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1" | 1/8" | 2,250 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 1/16" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 3/32" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/16" | 1/8" | 3,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/16" | 3,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
| 1 1/4" | 1/16" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/4" | 1/8" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/8" | 1/8" | 3,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 9/16" | 3/32" | 4,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 3/4" | 1/8" | 5,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 3,700 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||
| 1 1/2" | 1/16" | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 3,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 5,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||||
| 2" | 1/16" | 9,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 2" | 1/8" | 9,100 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 1 1/2" Shaft Dia. | |||||||
| 2 1/2" | 1/8" | 12,000 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
| 3 9/16" | 9/32" | 21,950 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||
| 2 5/8" | 1/8" | 10,900 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 2" Shaft Dia. | |||||||
| 3" | 1/8" | 12,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||||
| 24mm | 2mm | 4,200 lbs. @ 40 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 24mm | 3mm | 4,200 lbs. @ 40 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 14mm Shaft Dia. | |||||||
| 28mm | 2mm | 6,250 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 15mm Shaft Dia. | |||||||
| 30mm | 2mm | 7,200 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 30mm | 3mm | 7,200 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 16mm Shaft Dia. | |||||||
| 32mm | 2mm | 8,200 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 32mm | 3mm | 8,200 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 32mm | 4mm | 8,200 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 18mm Shaft Dia. | |||||||
| 36mm | 2mm | 10,400 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 36mm | 3mm | 10,400 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 20mm Shaft Dia. | |||||||
| 40mm | 2mm | 12,850 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 40mm | 3mm | 12,850 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 24mm Shaft Dia. | |||||||
| 48mm | 3mm | 18,500 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 48mm | 4mm | 18,500 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 25mm Shaft Dia. | |||||||
| 50mm | 3mm | 20,050 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 50mm | 4mm | 20,050 lbs. @ 15 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 30mm Shaft Dia. | |||||||
| 60mm | 4mm | 28,900 lbs. @ 10 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
| 60mm | 5mm | 28,900 lbs. @ 10 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
For 40mm Shaft Dia. | |||||||
| 60mm | 4mm | 22,100 lbs. @ 10 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
Made-to-Order 863 Bronze Bearings
To Order: For made-to-order bearings, please specify ID, OD, and thickness in 0.001" increments. The difference between the ID and OD must be at least 0.25".